Datasheet4U Logo Datasheet4U.com

NAS1352 - Socket Head Cap Screws

This page provides the datasheet information for the NAS1352, a member of the NAS1351 Socket Head Cap Screws family.

Features

  • if desired. After features (if any) then the Overall DataSheet4U. com Features for rotational security. Length is stated in 1/16ths of an inch. The last ( H ) for Drilled Head, or designation is for plating or finish. P= Cadmium II Plating Type 2, class 2, All materials ( LE ) for self locking element any type ( LL ) for self locking element Strip Type S= Silver Flashed for ( C ) and ( N ) materials. ( LN ) for self locking element Pellet Type No Suffix = Black oxide for (Alloy Steel) and Passiva.

📥 Download Datasheet

Datasheet preview – NAS1352

Datasheet Details

Part number NAS1352
Manufacturer GAH
File Size 299.46 KB
Description Socket Head Cap Screws
Datasheet download datasheet NAS1352 Datasheet
Additional preview pages of the NAS1352 datasheet.

📁 Similar Datasheet

Other Datasheets by GAH
  • NAS1351 - (NAS1352) Socket Head Cap Screws

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com NAS1351 (Fine) and NAS1352(Coarse) Socket Head Cap Screws Genuine Aircraft Hardware Co. Then to designate material add a( - ) for Alloy Steel 180KSI, or a ( C ) for Corrosion Resistant Steel (18-8) 80KSI, or an ( N ) 140-160KSI for Heat Resisting Steel per AMS5731 or 5737 (A286). After the ( - , C, or N) for material, place the Diameter Designation for your desired Shank Diameter that corresponds with your desired Thread Size. After all that but before the Length add Features if desired. After features (if any) then the Overall DataSheet4U.com Features for rotational security. Length is stated in 1/16ths of an inch. The last ( H ) for Drilled Head, or designation is for plating or finish.
Published: |