G1563 Datasheet | GMT

Features - - - - - - - - - - - - - General Description The G1563 is the dual rail-to-rail input/output operation amplifiers with the low power, high voltage swing. Operating on supplies ranging from 4.5V to 20V, while current consuming only 3m A / per amplifier, the G1563 is with high unit-gain bandwidth of 30MHz. The G1563 also provides mon mode input ability beyond the supply rails, as well as rail-to-rail output capability. This enables this amplifier to offer maximum dynamic range at any supply voltage. The G1563 also Features fast slewing and settling times, as well as a high output drive capability of 65m A (sink and source). These Features make these amplifiers ideal for high speed filtering and signal conditioning application. Other applications include battery power, TFT V /Gamma buffers, portable devices, and anywhere low power consumption is important. There are over temperature and short-circuit current limit protection embedded to avoid the unexpected damages. The G1563 is available in MSOP-8, TSSOP-8, SOP-8 (FD) and MSOP-8 (FD) package. Wide Supply Operation Range +4.5V to +20V Beyond the Rails Input Capability Rail-to-Rail Output Swing Low Supply Current, 3m A / Per Amplifier (Typical) Low Input Offset Voltage 2m V (Typical) Internal Frequency pensated for Unit Gain Stable Wide Bandwidth (unit gain) 30MHz High Slew Rate = 150V/μs Large DC Voltage Gain 80d B (Typical) ±180m A Output Short Current Embedded Over-Temperature Protection Short-Circuit Current Limit Protection MSOP-8, TSSOP-8, SOP-8 (FD) and MSOP-8 (FD) Package Available Applications - - Portable Equipment TFT V/Gamma buffers - Battery-Powered Equipment - ASIC Input or Output Amplifier - Low Power/Low Voltage Applications Ordering Information ORDER NUMBER G1563P81U G1563D11U G1563F11U G1563F12U G1563F51U Note: P8: MSOP-8 D1: TSSOP-8 1 & 2: Bonding Code U: Tape & Reel MARKING G1563 G1563 G1563A G1563 G1563 F1: SOP-8 (FD) TEMP. RANGE -40°C~ +85°C -40°C~ +85°C -40°C~ +85°C -40°C~ +85°C -40°C~...