GNS702 Datasheet | GNS

feature will improve this behaviour additionally. It adaptively adjusts power consumption depending on the environment and motion conditions, in order to achive a balance between fix rate, power consumption and position accuracy. Very low power requirements (typ 93m W@ 3.3V, tracking for GPS+GLONASS) and internal voltage regulator makes it easy to run the receiver with various power supplies and allows direct connection to Li Ion batteries. GNS702 offers the industry’s highest level of navigation sensitivity up to -165d Bm1. It has superior dynamic performance at high velocity and provides effective protection against interference signals using MTAICTM ( Multi-tone active interference canceller). Up to 12 independent channel interference continious wave jammers <-80d Bm can be eliminated or reduced. The embedded logger function LOCUS with a 16-hrs on chip memory makes this GPS module a plete track logger for many applications. With Always Locate TM data logging can be achieved up to 32-hrs under standard conditions. In professional timing applications the outstanding high accuracy PPS (pulse per second) hardware pin is used for synchronization to GPS second. Typical accuracy is 10ns. 1 Note: Based on chip specifications © GNS-Gmb H 2013 V 1.2, Apr 5th 2013 GPS/GLONASS receiver GNS702 Datasheet V1.2 preliminary specification Features - GLONASS and GPS simultaneously - 99 acquisition-/ 33 tracking channels - Ultra high tracking/navigation sensitivity: -165d Bm1 - Smart antenna: finely tuned 5.2x3.7x0.7mm ceramic chip antenna - SBAS (WAAS,EGNOS,MSAS,GAGAN, QZSS) correction support - A-GPS by EPO “Extended Prediction Orbit” TM enables 7/14days prediction - 12 Multitone Active Interference Canceller (MTAIC) for GPS-in-band jammer rejection - EASY TM : Self generated orbit prediction support - Always Locate TM : Intelligent Algorithm for power saving - High accuracy 1PPS output - NMEA-0183 or binary protocol - High update rate (up to 10/s) - Embedded logger function with...