GP509 - Class A Amplifier

Datasheet Summary

Description

The GP509 is a Class A amplifier utilizing Gennum’s proprietary low voltage JFET technology.

It consists of a singleended, low noise inverting gain block, a Class A output stage, and an on-chip microphone decoupling resistor.

Features

low amplifier current (typical 105 µA).
low noise and distortion.
1.0 to 5 VDC operating range www. DataSheet4U. com.

Gennum

📥 Download Datasheet

Datasheet Details

Part number	GP509
Manufacturer	Gennum
File Size	158.54 KB
Description	Class A Amplifier
Datasheet	GP509 Datasheet
Additional preview pages of the GP509 datasheet.

📁 Similar Datasheet

GP500LSS06S - Single Switch IGBT Module (Dynex Semiconductor)
GP50B60PD1 - SMPS IGBT (International Rectifier)
GP521 - General Purpose Controller / Memory Chip (Gennum Corporation)
GP5936 - P-CHANNEL ENHANCEMENT MODE POWER MOSFET (GTM CORPORATION)

Other Datasheets by Gennum

GP520A - Programmable Analog Signal Processor
GP522 - Controller Chip

Full PDF Text Transcription

Click to expand full text

Class A Amplifier with 2 Independent Gain Blocks GP509 DATA SHEET FEATURES • low amplifier current (typical 105 µA) • low noise and distortion • 1.0 to 5 VDC operating range www.DataSheet4U.com DESCRIPTION The GP509 is a Class A amplifier utilizing Gennum’s proprietary low voltage JFET technology. It consists of a singleended, low noise inverting gain block, a Class A output stage, and an on-chip microphone decoupling resistor. Block A typically has an open loop voltage gain of 56 dB, with the closed loop gain set by the ratio of the feedback resistor to the source impedance. It is recommended that the maximum closed loop gain be 20 dB lower than the open loop gain. All blocks of the device are internally bias compensated, preventing any DC current flow via external feedback resistors.

Published: Oct 13, 2008 |