Datasheet4U Logo Datasheet4U.com

GS1525 - HD-LINX II Voltage Controlled Oscillator

Description

The GO1525 is a self contained, miniature Voltage Controlled Oscillator (VCO).

Features

  • generates 1.485GHz or 1.485/1.001GHz signal for HD-LINX™II ICs low current consumption 50Ω output impedance operates from a single 2.5V supply 8 pin tape on reel Pb-free and RoHS Compliant 1.485GHz reference clock signal for the GS1560 and GS9060 deserializers, and for the GS1532 and GS9062 serializers. The control voltage range is from 1.0 volts to 1.5 volts and is derived from the on-chip PLLs. The GO1525 frequency can be pulled appro.

📥 Download Datasheet

Datasheet preview – GS1525

Datasheet Details

Part number GS1525
Manufacturer Gennum Corporation
File Size 217.84 KB
Description HD-LINX II Voltage Controlled Oscillator
Datasheet download datasheet GS1525 Datasheet
Additional preview pages of the GS1525 datasheet.

📁 Similar Datasheet

  • GS152B - P-CHANNEL ENHANCEMENT MODE POWER MOSFET (GTM)
  • GS1503B - HD Embedded Audio CODEC (GENNUM)
  • GS1504 - HDTV Adaptive Equalizer (ETC)
  • GS1508 - HDTV Cable Driver (ETC)
  • GS1508-CKA - HDTV Cable Driver (ETC)
  • GS1508-CTA - HDTV Cable Driver (ETC)
  • GS150TA25120 - Schottky Rectifier (IXYS)
  • GS150TI25120 - Schottky Rectifier (IXYS)
  • GS1575B - Multi-Rate SDI Automatic Reclocker (GENNUM)
  • GS1582 - Multi-Rate Serializer (Gennum)
Other Datasheets by Gennum Corporation
  • GS1522 - HDTV Serial Digital Serializer
  • GS1524 - HD-LINX-TM II Multi-Rate SDI Adaptive Cable Equalizer
  • GS1524A - Adaptive Cable Equalizer
  • GS1528 - HD-LINX-TM II Multi-Rate SDI Dual Slew-Rate Cable Driver
  • GS1528A - HD-LINX-R II Multi-Rate Dual Slew-Rate Cable Driver
  • GS1500 - HDTV Serial Digital Deformatter
  • GS1501 - HDTV Serial Digital Formatter
  • GS1503 - HD EMBEDDED AUDIO CODEC

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com GO1525 HD-LINX™II Voltage Controlled Oscillator GO1525 Data Sheet Key Features • • • • • • generates 1.485GHz or 1.485/1.001GHz signal for HD-LINX™II ICs low current consumption 50Ω output impedance operates from a single 2.5V supply 8 pin tape on reel Pb-free and RoHS Compliant 1.485GHz reference clock signal for the GS1560 and GS9060 deserializers, and for the GS1532 and GS9062 serializers. The control voltage range is from 1.0 volts to 1.5 volts and is derived from the on-chip PLLs. The GO1525 frequency can be pulled approximately 32MHz for every one volt of control. The output level is typically -9.0dBm with low spurious and noise content. It is designed to drive 50Ω strip lines. The VCO requires a single 2.5V supply and draws a maximum of 15mA of current.
Published: |