900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Genuine Aircraft Hardware

MS21063 Datasheet Preview

MS21063 Datasheet

Nut / Self-locking Gang Channel

No Preview Available !

Genuine Aircraft Hardware Co.
All original Text, Tables, and
Drawings are Copyright 1994-2006
reproduction by permission only.
MS21063
Nut, Self-locking Gang Channel, Floating, Low Height, Steel, 125 Ksi. Ftu. 250ºF
TABLE I. DASH NUMBERS AND DIMENSIONS
1/ “H” MAX APPLIES TO NUT ELEMENT AND CHANNEL. MIN “H” NOT SPECIFIED, LIMITED ONLY BY STRENGTH
REQUIREMENTS OF SPECIFICATION.
2/ HOLE IN CHANNEL MUST PROVIDE FOR FULL FLOAT OF NUT ELEMENT BUT NEED NOT BE CIRCULAR.
TABLE II. DASH NUMBERS AND DIMENSIONS
ADDITIONAL NOTES:
• PROCUREMENT SPECIFICATION: NONE
• SUPERSEDES: MS21063G
• THIS INFORMATION FROM MILITARY STANDARD MS21063 H PAGE 1 OF 3, REVISED APRIL 15, 1994, SOME DETAILS
MAY HAVE BEEN OMITTED FOR CLARITY.
Continued...
174 Documents in this book for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.




Genuine Aircraft Hardware

MS21063 Datasheet Preview

MS21063 Datasheet

Nut / Self-locking Gang Channel

No Preview Available !

All original Text, Tables, and
Drawings are Copyright 1994-2006
reproduction by permission only.
Genuine Aircraft Hardware Co.
MS21063
Nut, Self-locking Gang Channel, Floating, Low Height, Steel, 125 Ksi. Ftu. 250ºF
Continued...
REQUIREMENTS:
1. MATERIAL:
NUT ELEMENT - CARBON STEEL COMPOSITIONS 1035 (UNS G10350), 1040 (UNS G10400) AND 1050 (UNS G10500), IN ACCORDANCE
WITH ASTM A29, ASTM A827 OR QQ-S-700, 1042 (UNS G10420, IN ACCORDANCE WITH ASTM A29. ALLOY STEEL, GRADES 4130
(UNS G41300), 4340 (UNS G43400) AND 8740 (UNS G87400) IN ACCORDANCE WITH ASTM A29.
CHANNEL - ALUMINUM, ALLOY 1100, ANNEALED (UNS A91100), IN ACCORDANCE WITH QQ-A-250/1. ALUMINUM, ALLOY 2024,
TEMPER T4 (UNSA92024), IN ACCORDANCE WITH QQ-A-250/4. ALUMINUM, ALLOY 7075, TEMPER T6 (UNS A97075), IN ACCORDANCE
WITH QQ-A-250/12 OR QQ-A-250/13 (ALCLAD).
2. LENGTH: TO BE STOCKED IN 72-INCH LENGTHS ONLY.
3. FINISH:
NUT ELEMENTS - CADMIUM PLATE IN ACCORDANCE WITH QQ-P-416. TYPE II, CLASS 2. DRY FILM LUBRICATED NUT ELEMENTS IN
ACCORDANCE WITH QQ-P-416. TYPE AND CLASS ARE OPTIONAL IF THE NUT ELEMENTS WILL MEET THE SALT SPRAY
REQUIREMENTS OF QQ-P-416, TYPE II.
CHANNEL - IN ACCORDANCE WITH PROCUREMENT SPECIFICATION.
4. LUBRICANT: DRY FILM LUBRICANT ON NUT ELEMENT ONLY, APPROVED IN ACCORDANCE WITH MIL-N-S-8802.
5. DIMENSIONING AND TOLERANCING: DIMENSIONING AND TOLERANCING SHALL BE IN ACCORDANCE WITH ANSI Y14.5M.
6. HARDNESS: NUT ELEMENTS SHALL HAVE A HARDNESS OF 49HRC, MAX.
7. THREADS: THREADS BEFORE LUBRICATION IN ACCORDANCE WITH MIL-S-8879.
8. SURFACE TEXTURE: SURFACE TEXTURE, UNLESS OTHERWISE SPECIFIED, SHALL NOT EXCEED 125 MICROINCHES, IN
ACCORDANCE WITH ANSI/ASME 846.1.
9. FLOAT OF NUT ELEMENT: FLOAT OF NUT ELEMENT PORTION OF ASSEMBLY SHALL NOT BE LESS THAN .030 NOR MORE THAN .040
LONGITUDINALLY AND NOT LESS THAN .010 NOR MORE THAN.030 LATERALLY FROM CENTERED POSITION. NUT ELEMENT SHALL
BE CAPABLE OF ENGAGEMENT WITH A BOLT IN THE MAXIMUM MISALIGNMENT POSITION. MAXIMUM AXIAL FLOAT .020 INCH FOR
-08 AND -3. .030 FOR LARGER SIZES.
10. ASSEMBLY: THE ASSEMBLY SHALL PROVIDE A BEARING SURFACE FOR THE NUT ELEMENT WITHIN THE HOUSING. THE CENTER
LINE OF THE CHANNEL SHALL NOT DEVIATE FROM A STRAIGHT LINE BY MORE THAN .015 IN ANY 12 INCHES. THE NUT
ELEMENT AND BASE PORTION OF THE ASSEMBLY SHALL FORM ONE INTEGRAL UNIT.
11. EDGES: BREAK SHARP CORNERS AND REMOVE ALL BURRS.
12. CODE: FIRST DASH NUMBER DESIGNATES THREAD SIZE.
SECOND DASH NUMBER DESIGNATES NUT ELEMENT SPACING IN EIGHTS OF AN INCH.
THIRD DASH NUMBER INDICATES NUMBER OF NUT ELEMENTS WHEN LESS THAN STOCK LENGTH (APPROX. 72 INCHES)
IS DESIRED. LETTER “L” BEFORE FIRST DASH NUMBER DESIGNATES DRY FILM LUBRICATED NUT ELEMENTS.
13. PART NUMBER: THE PART NUMBER SHALL CONSIST OF THE BASIC MS NUMBER FOLLOWED BY A DASH NUMBER FROM TABLE I
AND TABLE II AND A THIRD DASH NUMBER, IF SPECIFIED (SEE REQUIREMENT 12).
EXAMPLE:
MS21063 - 3 - 6
DASH NUMBER FROM TABLE II
DASH NUMBER FROM TABLE I
BASIC MS NUMBER
MS21063-3-6 INDICATES:
NUT, SELF-LOCKING GANG CHANNEL, FLOATING, LOW HEIGHT, STEEL; 125 KSI FTU,
250ºF; GANG CHANNEL ASSEMBLY CONSISTING OF NINETY-SIX 190-32 UNJF -3B.
CADMIUM PLATED NUT ELEMENTS, SPACED AT .750 INCH.
MS210633L4-7-10 INDICATES: NUT, SELF-LOCKING GANG CHANNEL, FLOATING, LOW HEIGHT, STEEL; 125 KSI FTU,
250ºF; GANG CHANNEL ASSEMBLY CONSISTING OF TEN .250-28 UNJF -3B.
CADMIUM PLATED DRY FILM LUBRICATED NUT ELEMENTS, SPACED AT .875 INCH.
• PROCUREMENT SPECIFICATION: NONE
• SUPERSEDES: MS21063G
• THIS INFORMATION FROM MILITARY STANDARD MS21063 H PAGE 2 OF 3, REVISED APRIL 15, 1994, SOME DETAILS MAY HAVE BEEN
OMITTED FOR CLARITY.
Continued...
Documents in this book for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy. 175


Part Number MS21063
Description Nut / Self-locking Gang Channel
Maker Genuine Aircraft Hardware
PDF Download

MS21063 Datasheet PDF






Similar Datasheet

1 MS21060 NUT / Self-Locking
Military
2 MS21061 MS21061
Military
3 MS21061L3 SELF-LOCKING NUTPLATE
Military-Fasteners
4 MS21063 Nut / Self-locking Gang Channel
Genuine Aircraft Hardware
5 MS21069 MS21069
ETC
6 MS21069-02 MS21069 Nutplate Series
Coast Fabrication
7 MS21069-03 MS21069 Nutplate Series
Coast Fabrication
8 MS21069-04 MS21069 Nutplate Series
Coast Fabrication
9 MS21069-06 MS21069 Nutplate Series
Coast Fabrication





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy