GigaDevice GD25LQ64C
The GD25LQ64C (64M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual/Quad SPI and QPI mode: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), and I/O3 (HOLD#). The Dual I/O data is transferred with speed of 266Mbits/s and the Quad I/O & Quad output data is transferred with speed of 532Mbits/s. DEVICE OPERATION GD25LQ64C SPI Mode Standard SPI The GD25LQ64C features a serial peripheral interface on 4 signals bus: Serial Clock (SCLK), Chip Select (CS#), Serial Data Input (SI) and Serial Data Output (SO).| Part No. | GD25LQ64C |
|---|---|
| Datasheet | GD25LQ64C Download |
| Manufacturer |  GigaDevice |
| Description | 1.8V Uniform Sector Dual and Quad Serial Flash |
| Buy | Stock & Price |
FEATURES
GD25LQ64C● 64M-bit Serial Flash -8192K-byte -256 bytes per programmable page
● Standard, Dual, Quad SPI, QPI -Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD# -Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD# -Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3 -QPI: SCLK, CS#, IO0, IO1, IO2, IO3
● High Speed Clock Frequency -133MHz for fast read with 30PF load -Dual I/O Data transfer up to 266Mbits/s -Quad I/O Data transfer up to 532Mbits/s -QPI Mode Data transfer up to 532Mbits/s
● Software/Hardware Write Protection -Write protect all/portion of memory via software -Enable/Disable protection with WP# Pin -Top or Bottom, Sector or Block selection
● Program/Erase Speed -Page Program time: 0.7ms typical -Sector Erase time: 90ms typical -Block Erase time: 0.3/0.45s typical -Chip Erase time: 30s typical
● Flexible Architecture -Sector of 4K-byte -Block of 32/64k-byte -Erase/Program Suspend/Resume
● Low Power Consumption -20mA maximum active current -5uA maximum power down current
● Advanced security Fe...
