HSF2000-JK Datasheet | HOPERF

DESCRIPTION The Series of pressure sensor is a silicon micro-machined membrane, piezo-resistive sensor. They were designed for extremely cost sensitive applications where the sensing element is to be integral to the OEM equipment, and are intended for use with non-corrosive, non-ionic media. They also may be packaged with application specific sensor die so that the performance characteristics and output range also can be identified. FEATURES - Unpensated pressure sensor - Temperature Range -40°C ~ +125°C - Low Cost, High reliability APPLICATION - For high resolution absolute sensor systems - Engine Controls - Barometers, Altimeters, Variometers Full Scale Pressure k Pa 100 bar 1 mbar 1000 PSI 15 atm 1 mm Hg 750 mm H2O 10207 kg/cm2 1 Part number System Pressure type H S F 2000-JK Package Pressure range Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: sales@hoperf. http://.hoperf.cn Free Datasheet http://../ VER：2.1 Characteristics Workingconditions:DC@5v,Pressure2000KP,temperature 25 ℃ , humidity at 30% -90% 最小值 标准值 最大值 单位 项目 Pressure range Supply voltage Currency Span Offset Temperture cofficient Temperture coefficient of zero Nonlinearity Bridge resistance Proof pressure Operating temperature Storage temperature -40 -40 0 0 60 -30 -16 -4 0 4 300PSI 5.0 1.5 100 0 -22 -6 0.1 5 10.0 3.0 140 30 -28 -8 0.5 6 2× 125 125 Volts m A m V m V %FS/100℃ %FS/100℃ %F.S KΩ 满量程 ℃ ℃ WAFER ELECTRICAL CONNECTIONS 1. Best fit straight line. 2. Coefficients are typical values between -10℃ and 40℃. Pin Configuration PAD Definition 1 NC 2 VOFax: +86-755-82973550 3 VO+ 4 NC 5 VCC 6 GND Tel: +86-755-82973805 E-mail: sales@hoperf. http://.hoperf.cn Free Datasheet http://../ VER：2.1 FR4 Package Outlines This document may contain preliminary information and is subject to change by Hope Microelectronics without notice. Hope Microelectronics assumes no responsibility or liability for any use of the information contained herein. Nothing in this document shall operate as...