RF67 Datasheet | HOPERF

DESCRIPTION The RF67 is a fully integrated transmitter which can operate in the 315, 434, 868 and 915 MHz licence free ISM bands. The transmitter has two modes of operation, a conventional MCU controlled mode and a ‘stand-alone’ mode which enables the RF67 to download configuration and messages from an E2PROM in response to a user input. Stand-alone mode makes the RF67 ideal for miniaturized or low cost remote keyless entry (RKE) applications. It also offers the unique advantage of narrow-band and wide-band munication in a range of modulation formats. The RF67 offers high RF output power and channelized operation suited for the European (ETSI EN 300-220-1), North American (FCC part 15.231, 15.247 and 15.249) and Japanese (ARIB T-67) regulatory standards. APPLICATIONS - - - - - - - - - - - - Remote Keyless Entry (RKE) Remote Control / Security Systems Voice and Data RF munication Links Process and building / home control Active RFID AMR / AMI Platforms +17 d Bm to -18 d Bm Programmable output power. Bit rates up to 600 kbits / sec. FSK, GFSK, MSK, GMSK and OOK modulation. Stand-alone mode: No need for a host MCU. Consistent RF performance over a 1.8 to 3.7 V range. Low phase noise (-95 d Bc/Hz at 50 k Hz) with automated PLL calibration and fully integrated VCO and loop filter. - - On chip RC timer for timer / wake-up applications. Low battery detection. KEY PRODUCT FEATURES ORDERING INFORMATION Part Number RF67 Temperature Range -40 ° C to +85 ° C Qty. per Reel 3000 Package MLPQ-24 (4x4mm) Page 1 Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: sales@hoperf. http://.hoperf. Free Datasheet http://../ ADVANCED MUNICATIONS & SENSING Table of contents Section Page 1. General Description 4 1.1. 1.2. Simplified Block Diagram...