RFM23B Datasheet | HOPERF

Features - V1.0 Frequency Range - 433/868/915MHz ISM bands Sensitivity = - 121 d Bm Output power range - +20 d Bm Max (RFM22B) - +13 d Bm Max (RFM23B) Low Power Consumption - 18.5 m A receive - 30 m A @ +13 d Bm transmit - 85 m A @ +20 d Bm transmit Data Rate = 0.123 to 256 kbps FSK, GFSK, and OOK modulation Power Supply = 1.8 to 3.6 V Ultra low power shutdown mode Digital RSSI - - - - - - - - - - - - - - - - - - - - - - - Wake-up timer Auto-frequency calibration (AFC) Power-on-reset (POR) Antenna diversity and TR switch control Configurable packet handler Preamble detector TX and RX 64 byte FIFOs Low battery detector Temperature sensor and 8-bit ADC - 40 to +85 °C temperature range Integrated voltage regulators Frequency hopping capability On-chip crystal tuning 14-PIN DIP & 16-PIN SMD package Low cost RFM22B/23B Applications - - - - - - - Remote control Home security & alarm Telemetry Personal data logging Toy control Tire pressure monitoring Wireless PC peripherals - - - - - - - Remote meter reading Remote keyless entry Home automation Industrial control Sensor networks Health monitors Tag readers Description Hope RF's RFM22B/23B are highly integrated, low cost,433/868/915MHZ wireless ISM transceivers module. The low receive sensitivity(- 121d Bm) coupled with industry leading +20d Bm output power ensures extended range and improved link performance. Built-in antenna diversity and support for frequency hopping can be used to further extend range and enhance performance. Additional system features such as an automatic wake-up timer, low battery detector, 64 byte TX/RX FIFOs, automatic packet handling, and preamble detection reduce overall current consumption and allow the use of lower-cost system MCUs. An integrated temperature sensor, general purpose ADC, poweron-reset (POR), and GPIOs further reduce overall system cost and size. The RFM22B/23B’s digital receive architecture features a high-performance ADC and DSP based modem which performs demodulation,...