RFM63B Datasheet | HOPERF

Description The RFM63B is a low cost transceiver module operating in the 868 and 915MHz frequency bands, The RFM63B is optimized for very low power consumption (3m A in receiver mode). It incorporates a baseband modem with data rates up to 200 kb/s. Data handling features include a sixty-four byte FIFO, packet handling, automatic CRC generation and data whitening. All major RF munication parameters are programmable and most of them may be dynamically set. It plies with European (ETSI EN 300-220 V2.1.1) and North American (FCC part 15.247 and 15.249) regulatory standards. （Note：RFM63B for No SAW filter module， Application transmit function can't meet the FCC/CE standard requirements） V1.1 ADVANCED MUNICATIONS & SENSING In order to better use RFM63B modules, this specification also involves a large number of the parameters and functions of its core chip RF63's, including those IC pins which are not leaded out. All of these can help customers gain a better understanding of the performance of RFM63B modules, and enhance the application skills. Applications - - - - - - Wireless alarm and security systems Wireless sensor networks Automated Meter Reading Home and building automation Industrial monitoring and control Remote Wireless Control Features - - - - - - - - - - - - - Low Rx power consumption: 3m A Low Tx power consumption: 25 m A @ +10 d Bm Good reception sensitivity: down to -105 d Bm at 25 kb/s in FSK, -111 d Bm at 2kb/s in OOK Programmable RF output power: up to +12 d Bm in 8 steps Packet handling feature with data whitening and automatic CRC generation Wide RSSI (Received Signal Strength Indicator) dynamic range, 70d B from Rx noise floor Bit rates up to 200 kb/s, NRZ coding On-chip frequency synthesizer FSK and OOK modulation Ining sync word recognition Built-in Bit-Synchronizer for ining data and clock synchronization and recovery Module Size： 19.7X16mm Optimized Circuit Configuration for Low-cost applications Page 1 of 91 Tel: +86-755-82973805 Fax:...