P61089B - High Voltage Ringing SLIC Protector

HUAAN

General Description

This device has been especially designed to protect 2 new high voltage, as well as classical SLICs, against transient overvoltages.

Positive overvoltages are clamped by 2 diodes.

VBAT through the gat

Key Features

Dual line programmable transient voltage suppressor.
Wide negative firing voltage range: VMGL =-155V.
Holding current: IH >150mA.
Marking: P61089B.

📥 Download Datasheet

P61089B high voltage ringing slic protector by HUAAN - Datasheet Preview

Datasheet Details

Part number	P61089B
Manufacturer	HUAAN
File Size	441.37 KB
Description	High Voltage Ringing SLIC Protector
Datasheet	P61089B Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
P6103AS8	5V/12V Synchronous-Rectified Buck Controller	uPI Semiconductor
P6103ASU8	5V/12V Synchronous-Rectified Buck Controller	uPI Semiconductor
P6103S8	5V/12V Synchronous-Rectified Buck Controller	uPI Semiconductor
P617A	Level translating Fm+ I2C-bus repeater	NXP

Other Datasheets by HUAAN

Part Number	Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

P61089B P61089B High Voltage Ringing SLIC Protector General Description This device has been especially designed to protect 2 new high voltage, as well as classical SLICs, against transient overvoltages. Positive overvoltages are clamped by 2 diodes. Negative surges are suppressed by 2 thyristors, their breakdown voltage being referenced to –VBAT through the gate. This component presents a very low gate triggering current (IGT) in order to reduce the current consumption on printed circuit board during the firing phase. This devices are not subject to ageing and provide a fail safe mode in short circuit for a better protection. They are used to help equipment to meet various standards such as UL1950, IEC950/CSA C22.2, UL1459 and FCC part68.