Datasheet4U Logo Datasheet4U.com

MP9141 - Monolithic step-down switch mode converter

Description

The MP9141 is a monolithic step-down switch mode converter with a built in internal power MOSFET.

It achieves 2A continuous output current over a wide input supply range with excellent load and line regulation.

TheMP9141requires a minimum number of readily available standard external components.

Features

  • 2A Output Current.
  • 0.22Ω Internal Power MOSFET Switch.
  • Stable with Low ESR Output Ceramic Capacitors.
  • Up to 95% Efficiency.
  • 25µA Shutdown Mode.
  • Fixed 450KHz Frequency.
  • Thermal Shutdown.
  • Cycle-by-Cycle Over Current Protection.
  • Wide 4.75 to 25V Operating Input Range.
  • Output Adjustable from 1.22V to 21V.
  • Programmable Under Voltage Lockout.

📥 Download Datasheet

Datasheet preview – MP9141

Datasheet Details

Part number MP9141
Manufacturer HUAFUQIN ELECTRONICS
File Size 362.44 KB
Description Monolithic step-down switch mode converter
Datasheet download datasheet MP9141 Datasheet
Additional preview pages of the MP9141 datasheet.

📁 Similar Datasheet

  • MP9148 - SYNC Buck Regulator (MPS)
  • MP9148GJ - SYNC Buck Regulator (MPS)
  • MP915 - Power Film Resistors (Caddock)
  • MP9159A - COT Synchronous Step-Down Converter (MPS)
  • MP916 - Power Film Resistors (Caddock)
  • MP9161A - COT Synchronous Step-Down Converter (MPS)
  • MP9184 - Synchronous Boost Converter (MPS)
  • MP9186 - 20V 6A Synchronous Step-Down Converter (MPS)
  • MP900 - Ultra High Sensitivity Gateable Photon Counting Module (PerkinElmer)
  • MP901 - Air-Quality Gas Sensor (Winsen)
Other Datasheets by HUAFUQIN ELECTRONICS

    Full PDF Text Transcription

    Click to expand full text
    SHENZHEN HUAFUQIN ELECTRONICS CO.,LTD MP9141 DESCRIPTION The MP9141 is a monolithic step-down switch mode converter with a built in internal power MOSFET. It achieves 2A continuous output current over a wide input supply range with excellent load and line regulation. TheMP9141requires a minimum number of readily available standard external components. Current mode operation provides fast transient response and eases loop stabilization. Fault condition protection includes cycle-bycycle current limiting and thermal shutdown. In shutdown mode the regulator draws 25µA of supply current. FEATURES • 2A Output Current • 0.
    Published: |