Datasheet4U Logo Datasheet4U.com

S11059-01WT - I2C interface-compatible color sensor

Features

  • I2C interface compatible Sequential measurements of red, green, blue, and infrared light 2-step sensitivity switching (sensitivity ratio 1 : 10) Sensitivity adjustment by setting the integration time Low voltage (2.5 V or 3.3 V) operation Low current consumption: 75 NjA typ. Small package (WL-CSP: wafer level-chip size package) Internal infrared-cut ¿lter Wide dynamic range (Low gain: 1 to 10 klx) Feature.

📥 Download Datasheet

Datasheet preview – S11059-01WT

Datasheet Details

Part number S11059-01WT
Manufacturer Hamamatsu
File Size 236.25 KB
Description I2C interface-compatible color sensor
Datasheet download datasheet S11059-01WT Datasheet
Additional preview pages of the S11059-01WT datasheet.

📁 Similar Datasheet

  • S110 - SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER (YS)
  • S110 - 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER (WON-TOP)
  • S110 - SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER (CDIL)
  • S110 - Relay (Solid State Optronic)
  • S110-X - AC Solid State Relay (Solid State Optronic)
  • S1101 - Thermocouple Module Manual (ART Technology)
  • S1104SXU30 - Flat Base Rectifier Diode (DYNEX)
  • S1107SXU40 - Flat Base Rectifier Diode (DYNEX)
  • S11 - THIN FILM SPST SWITCH (Tyco Electronics)
  • S111 - Solid State Relay (Solid State Optronics)
Other Datasheets by Hamamatsu

Full PDF Text Transcription

Click to expand full text
Color sensor S11059-01WT I2C interface-compatible color sensor The S11059-01WT is a color sensor that supports the I2C (inter-integrated circuit) interface. It is sensitive to red (O=615 nm), green (O=530 nm), blue (O=460 nm), and infrared (O=855 nm) light, and outputs detected results as 16-bit digital data for each color. The photodiode for each color is automatically switched sequentially to perform measurements. The sensitivity and integration time can be adjusted so that light measurements can be performed over a wide range. Features I2C interface compatible Sequential measurements of red, green, blue, and infrared light 2-step sensitivity switching (sensitivity ratio 1 : 10) Sensitivity adjustment by setting the integration time Low voltage (2.5 V or 3.
Published: |