900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Harris Corporation

HIN201 Datasheet Preview

HIN201 Datasheet

(HIN200 - HIN213) +5V Powered RS-232 Transmitters/Receivers

No Preview Available !

www.DataSheet4U.com
HIN200 thru HIN213S E M I C O N D U C T O R
August 1997
+5V Powered RS-232 Transmitters/Receivers
with 0.1Microfarad External Capacitors
Features
• Meets All RS-232E and V.28 Specifications
• HIN203 and HIN205 Require No External Capacitors
• Requires Only 0.1µF or Greater External Capacitors
• 120kbit/s Data Rate
• Two Receivers Active in Shutdown Mode (HIN213)
• Requires Only Single +5V Power Supply
- (+5V and +12V - HIN201 and HIN209)
• Onboard Voltage Doubler/Inverter
• Low Power Consumption (Typ) . . . . . . . . . . . . . . . 5mA
• Low Power Shutdown Function (Typ) . . . . . . . . . . .1µA
• Three-State TTL/CMOS Receiver Outputs
• Multiple Drivers
- ±10V Output Swing for +5V lnput
- 300Power-Off Source Impedance
- Output Current Limiting
- TTL/CMOS Compatible
- 30V/µs Maximum Slew Rate
• Multiple Receivers
- ±30V Input Voltage Range
- 3kto 7kInput Impedance
- 0.5V Hysteresis to Improve Noise Rejection
Description
The HIN200-HIN213 family of RS-232 transmitters/receivers
interface circuits meet all ElA RS-232E and V.28 specifications,
and are particularly suited for those applications where ±12V is
not available. They require a single +5V power supply (except
HIN201 and HIN209) and feature onboard charge pump volt-
age converters which generate +10V and -10V supplies from
the 5V supply. The HIN203 and HIN205 require no external
capacitors and are ideally suited for applications where circuit
board space is critical. The family of devices offers a wide vari-
ety of RS-232 transmitter/receiver combinations to accommo-
date various applications (see Selection Table).
The HIN200, HIN206, HIN211 and HIN213 feature a low
power shutdown mode to conserve energy in battery
powered applications. In addition, the HIN213 provides two
active receivers in shutdown mode allowing for easy
“wakeup” capability.
The drivers feature true TTL/CMOS input compatibility, slew
rate-limited output, and 300power-off source impedance.
The receivers can handle up to ±30V input, and have a 3k
to 7kinput impedance. The receivers also feature hystere-
sis to greatly improve noise rejection.
Applications
• Any System Requiring RS-232 Communications Port
- Computer - Portable, Mainframe, Laptop
- Peripheral - Printers and Terminals
- Instrumentation
- Modems
Selection Table
PART
NUMBER
HIN200
HIN201
HIN202
HIN203
HIN204
HIN205
HIN206
HIN207
HIN208
HIN209
HIN211
HIN213
POWER SUPPLY
VOLTAGE
+5V
+5V and +9V to 13.2V
+5V
+5V
+5V
+5V
+5V
+5V
5V
+5V and +9V to 13.2V
+5V
+5V
NUMBER OF
RS-232
DRIVERS
5
2
2
2
4
5
4
5
4
3
4
4
NUMBER OF
RS-232
RECEIVERS
0
2
2
2
0
5
3
3
4
5
5
5
NUMBER OF
0.1µF
EXTERNAL
CAPACITORS
4 Capacitors
2 Capacitors
4 Capacitors
None
4 Capacitors
None
4 Capacitors
4 Capacitors
4 Capacitors
2 Capacitors
4 Capacitors
4 Capacitors
LOW POWER
SHUTDOWN/TTL
THREE-STATE
Yes/No
No/No
No/No
No/No
No/No
Yes/Yes
Yes/Yes
No/No
No/No
No/Yes
Yes/Yes
Yes/Yes
NUMBER OF
RECEIVERS
ACTIVE IN
SHUTDOWN
0
0
0
0
0
0
0
0
0
0
0
2
CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper IC Handling Procedures.
Copyright © Harris Corporation 1997
8-3
File Number 3980.6




Harris Corporation

HIN201 Datasheet Preview

HIN201 Datasheet

(HIN200 - HIN213) +5V Powered RS-232 Transmitters/Receivers

No Preview Available !

HIN200 thru HIN213
Ordering Information
PART NO.
HIN200CB
HIN200IB
HIN201CB
HIN201IB
HIN202CP
HIN202CB
HIN202IP
HIN202CA
HIN202IA
HIN202IB
HIN202CBN
HIN202IBN
HIN203CP
HIN203CB
HIN204CB
HIN204IB
HIN205CP
HIN206CP
HIN206CB
HIN206CA
HIN206IP
HIN206IB
HIN206IA
HIN207CP
TEMP.
RANGE (oC)
PACKAGE
0 to 70 20 Ld SOIC
-40 to 85 20 Ld SOIC
0 to 70 16 Ld SOIC (W)
-40 to 85 16 Ld SOIC (W)
0 to 70 16 Ld PDIP
0 to 70 16 Ld SOIC (W)
-40 to 85 16 Ld PDIP
0 to 70 16 Ld SSOP
-40 to 85 16 Ld SSOP
-40 to 85 16 Ld SOIC (W)
0 to 70 16 Ld SOIC (N)
-40 to 85 16 Ld SOIC (N)
0 to 70 20 Ld PDIP
0 to 70 20 Ld SOIC (W)
0 to 70 16 Ld SOIC (W)
-40 to 85 16 Ld SOIC (W)
0 to 70 24 Ld PDIP (W)
0 to 70 24 Ld PDIP (N)
0 to 70 24 Ld SOIC
0 to 70 24 Ld SSOP
-40 to 85 24 Ld PDIP (N)
-40 to 85 24 Ld SOIC
-40 to 85 24 Ld SSOP
0 to 70 24 Ld PDIP (N)
Pin Descriptions
PKG. NO.
M20.3
M20.3
M16.3
M16.3
E16.3
M16.3
E16.3
M16.209
M16.209
M16.3
M16.15
M16.15
E20.3
M20.3
M16.3
M16.3
E24.3
E24.3
M24.3
M24.209
E24.3
M24.3
M24.209
E24.3
PART NO.
HIN207CB
HIN207CA
HIN207IP
HIN207IB
HIN207IA
HIN208CP
HIN208CB
HIN208CA
HIN208IP
HIN208IB
HIN208IA
HIN209CP
HIN209CB
HIN209IP
HIN209IB
HIN211CB
HIN211CA
HIN211IB
HIN211IA
HIN213CB
HIN213CA
HIN213IB
HIN213IA
TEMP.
RANGE (oC)
PACKAGE
0 to 70 24 Ld SOIC
0 to 70 24 Ld SSOP
-40 to 85 24 Ld PDIP (N)
-40 to 85 24 Ld SOIC
-40 to 85 24 Ld SSOP
0 to 70 24 Ld PDIP (N)
0 to 70 24 Ld SOIC
0 to 70 24 Ld SSOP
-40 to 85 24 Ld PDIP (N)
-40 to 85 24 Ld SOIC
-40 to 85 24 Ld SSOP
0 to 70 24 Ld PDIP (N)
0 to 70 24 Ld SOIC
-40 to 85 24 Ld PDIP (N)
-40 to 85 24 Ld SOIC
0 to 70 28 Ld SOIC
0 to 70 28 Ld SSOP
-40 to 85 28 Ld SOIC
-40 to 85 28 Ld SSOP
0 to 70 28 Ld SOIC
0 to 70 28 Ld SSOP
-40 to 85 28 Ld SOIC
-40 to 85 28 Ld SSOP
PKG. NO.
M24.3
M24.209
E24.3
M24.3
M24.209
E24.3
M24.3
M24.209
E24.3
M24.3
M24.209
E24.3
M24.3
E24.3
M24.3
M28.3
M28.209
M28.3
M28.209
M28.3
M28.209
M28.3
M28.209
PIN
VCC
V+
V-
GND
C1+
C1-
C2+
C2-
TIN
TOUT
RIN
ROUT
EN, EN
SD, SD
NC
FUNCTION
Power Supply Input 5V ±10%, 5V ±5% (HIN200, HIN207, HIN203, and HIN205).
Internally generated positive supply (+10V nominal), HIN201 and HIN209 requires +9V to +13.2V.
Internally generated negative supply (-10V nominal).
Ground lead. Connect to 0V.
External capacitor (+ terminal) is connected to this lead.
External capacitor (- terminal) is connected to this lead.
External capacitor (+ terminal) is connected to this lead.
External capacitor (- terminal) is connected to this lead.
Transmitter Inputs. These leads accept TTL/CMOS levels. An internal 400kpull-up resistor to VCC is connected to each lead.
Transmitter Outputs. These are RS-232 levels (nominally ±10V).
Receiver Inputs. These inputs accept RS-232 input levels. An internal 5kpull-down resistor to GND is connected to each input.
Receiver Outputs. These are TTL/CMOS levels.
Enable input. This is an active low input which enables the receiver outputs. With EN = 5V, (HIN213 EN = 0V), the outputs
are placed in a high impedance state.
Shutdown Input. With SD = 5V (HIN213 SD = 0V), the charge pump is disabled, the receiver outputs are in a high impedance
state (except R4 and R5 of HIN213) and the transmitters are shut off.
No Connect. No connections are made to these leads.
8-4


Part Number HIN201
Description (HIN200 - HIN213) +5V Powered RS-232 Transmitters/Receivers
Maker Harris Corporation
Total Page 14 Pages
PDF Download

HIN201 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 HIN200 (HIN200 - HIN213) +5V Powered RS-232 Transmitters/Receivers
Harris Corporation
2 HIN201 +5V Powered RS-232 Transmitters/Receivers with 0.1Microfarad External Capacitors
Intersil Corporation
3 HIN201 (HIN200 - HIN213) +5V Powered RS-232 Transmitters/Receivers
Harris Corporation
4 HIN202 +5V Powered RS-232 Transmitters/Receivers with 0.1Microfarad External Capacitors
Intersil Corporation
5 HIN202 +5V Powered RS-232 Transmitters/Receivers
Renesas
6 HIN202 (HIN200 - HIN213) +5V Powered RS-232 Transmitters/Receivers
Harris Corporation
7 HIN202A High Speed +5V Powered RS-232 Transmitters/Receivers
Intersil Corporation
8 HIN202E +/-15kV/ ESD-Protected/ +5V Powered/RS-232 Transmitters/Receivers
Intersil Corporation
9 HIN203 +5V Powered RS-232 Transmitters/Receivers with 0.1Microfarad External Capacitors
Intersil Corporation





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy