Datasheet4U Logo Datasheet4U.com

VTO-8951 - Voltage Controlled Oscillator

Download the VTO-8951 datasheet PDF. This datasheet also covers the VTO-8951_Hewlett variant, as both devices belong to the same voltage controlled oscillator family and are provided as variant models within a single manufacturer datasheet.

Description

The VTO-8951 provides a fundamental, low jitter source as a key component for the data re-timing in the transmitter subsystem and clock and data recovery in the receiver of the 10 Gb fiber optic systems.

Features

  • Operating frequency: 9.50 to 11.0 GHz.
  • Output power (50Ω Load): 10 dBm minimum.
  • Modulation sensitivity: 150 to 250 MHz/V.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (VTO-8951_Hewlett-Packard.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number VTO-8951
Manufacturer Hewlett-Packard
File Size 85.09 KB
Description Voltage Controlled Oscillator
Datasheet download datasheet VTO-8951 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
VTO-8950 Varactor-Tuned Oscillators Agilent(Hewlett-Packard)
VTO-8000 Varactor-Tuned Oscillators Agilent(Hewlett-Packard)
VTO-8060 Varactor-Tuned Oscillators Agilent(Hewlett-Packard)
VTO-8080 Varactor-Tuned Oscillators Agilent(Hewlett-Packard)
VTO-8090 Varactor-Tuned Oscillators Agilent(Hewlett-Packard)

Other Datasheets by Hewlett-Packard

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Agilent VTO-8951 Voltage Controlled Oscillator Data Sheet Features • Operating frequency: 9.50 to 11.0 GHz • Output power (50Ω Load): 10 dBm minimum • Modulation sensitivity: 150 to 250 MHz/V Description The VTO-8951 provides a fundamental, low jitter source as a key component for the data re-timing in the transmitter subsystem and clock and data recovery in the receiver of the 10 Gb fiber optic systems. The oscillator uses an extremely high performance low noise Agilent Silicon Bipolar transistor in conjunction with a hyperabrupt varactor diode to provide the tuning capability. The oscillator output is then coupled to through a bandpass filter to the output.
Published: |