Datasheet4U Logo Datasheet4U.com

H431CM - AJDUSTABLE SHUNT REGULATOR

Download the H431CM datasheet PDF. This datasheet also covers the H431CM_Hi variant, as both devices belong to the same ajdustable shunt regulator family and are provided as variant models within a single manufacturer datasheet.

Description

The H431 series are three-terminal adjustable regulators with guarante-ed thermal stability over applicable temperature ranges.

The output voltage may be set to any value between VREF (approximately 2.495 volts) and 36 volts with two external resistors.

Features

  • Programmable output voltage.
  • Temperature coefficient is 50ppm/oC typical.
  • Temperature compensated for operation over full temperature range.
  • Low output noise voltage.
  • Fast turn on response Ordering Information H431 Series Pin Assignment 3 12 3-Lead Plastic SOT-23 Package Code: N Pin 1: Reference Pin 2: Cathode Pin 3: Anode.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (H431CM_Hi-SincerityMocroelectronics.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number H431CM
Manufacturer Hi-Sincerity Mocroelectronics
File Size 221.61 KB
Description AJDUSTABLE SHUNT REGULATOR
Datasheet download datasheet H431CM Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer

Other Datasheets by Hi-Sincerity Mocroelectronics

Part Number Description
H431CA AJDUSTABLE SHUNT REGULATOR
H431AA AJDUSTABLE SHUNT REGULATOR
H431AM AJDUSTABLE SHUNT REGULATOR
H431BA AJDUSTABLE SHUNT REGULATOR
H431BM AJDUSTABLE SHUNT REGULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HI-SINCERITY MICROELECTRONICS CORP. Spec. No. : IC200401 Issued Date : 2004.03.01 Revised Date : 2008.04.01 Page No. : 1/7 H431 Series ADJUSTABLE SHUNT REGULATOR Description The H431 series are three-terminal adjustable regulators with guarante-ed thermal stability over applicable temperature ranges. The output voltage may be set to any value between VREF (approximately 2.495 volts) and 36 volts with two external resistors. These devices have a typical dynamic output impedance of 0.2Ω. Active output circuitry provides a very sharp turn-on characteristic, making these devices excellent replacement for zener diodes in many applications.
Published: |