900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






High Voltage Power Solutions

HE300 Datasheet Preview

HE300 Datasheet

SECONDARY SURGE

No Preview Available !

www.DataSheet4U.com
HE300
120 VAC
1‡, 2W
FEATURES
x Industrial/Commercial Version
x MOV Circuit Design
x Made in America utilizing
American Components
x Cost Effective
x Reliable Solid-State Protection
x Maintenance Free
x Molded Plastic Case
x Threaded 1/2" NPT conduit nipple with locknut
x 18 " Stranded 12 AWG color coded leads
x Suitable for indoor or outdoor installation
x Automatic Recovery, Self Restoring
SECONDARY
SURGE
"LIGHTNING"
ARRESTER
DESCRIPTION
The HE300 is a MOV (Metal Oxide Varistor) based hardwired Secondary Surge Arrester, often referred to as a
Lightning Arrester. The device is designed to protect electrical equipment from damaging effects of Spikes (+) and
Notches (-) caused by lightning, utility switching, insulation arcing, electrical motor cycling, and other large or sudden
changes in electrical power flow on incoming AC power lines.
The HE300 is a single phase, two wire, arrester intended to protect 120 VAC systems. The epoxy encapsulated
arrester is designed to be easily installed in any position indoors or outdoors utilizing the integral 1/2" threaded nipple
and supplied metal lock nut.
The housing is molded from flame retardant plastic that is both weather and UV resistant, and complies with the UL
standard for strength and flame resistance properties. The arrester is sealed with UL component recognized epoxy
potting compound. The HE300 has three 18" long, 12 AWG multi-stranded leads that are color coded for ease of
installation.
The HVPSI HE300 is ideal protection for outdoor lighting and pole lamps, panelboards, oilfield pumps, workshops,
irrigation and sump pumps, refrigeration systems, farm equipment including milking machines and poultry processing
equipment, electric motors and controls, heat pumps and air conditioning equipment and many other electrical
devices.
The HE300 utilizes a single MOV per pole to reduce the potential load balancing/sharing problems during operation.
UL listed versions :
HE500 120/240V, Single Phase, Three Wire, Industrial/Commercial Version.
HE510 120/240V, Single Phase, Three Wire, Residential Version.
HE1203 120/208V, Three Phase, Four Wire, Industrial/Commercial Version.
HE4803 277/480V, Three Phase, Four Wire, Industrial/Commercial Version.
Rev 2, Aug 2007
PO Box 700968 Ɣ Dallas TX 75370
Ph (972) 248-7691 Ɣ Fax (972) 381-9998




High Voltage Power Solutions

HE300 Datasheet Preview

HE300 Datasheet

SECONDARY SURGE

No Preview Available !

www.DataSheet4U.com
ELECTRICAL CHARACTERISTICS
PART
NUMBER
SERVICE
VOLTAGE
AC
PHASE
WIRE
CONFIGURATION
HE300
120V
175V Max
(rms)
SINGLE
Line (Black)
Neutral/Ground (White)
HE300
TYPICAL CLAMP VOLTAGE
8 X 20uS Current Wave (Line to Ground)
1.5kA
500V(1)
625V(2)
5kA
650V(1)
950V(2)
10kA
750V(1)
1400V(2)
20kA
950V(1)
2200V(2)
25kA
1050V(1)
2600V(2)
(1) 1" leads (2) 18" leads
DIMENSIONS AND WIRING DIAGRAMS
ARCHITECT and ENGINEERS
SUGGESTED SPECIFICATIONS
The single phase, two wire Secondary Surge Arrester for
120 volt AC service or machine equipment shall be a
High Voltage Power Solutions Model HE300. The
lightning arrester shall be of a single MOV per pole
design and provide protection for Category C Transient
Surges as defined in ANSI C62.41 (Formerly IEEE Std.
587-1980) without degradation of the components. The
surge protector shall protect between the line and
neutral/ground conductor. The enclosure shall be
molded of fire retardant plastic. The unit will be sealed
with a UL component recognized epoxy potting
compound to minimize moisture and pollution intrusion.
A one-half inch conduit nipple and metal lock nut shall
be provided. 18 inch, stranded 12 gauge color coded
leads shall be provided. The arrester shall carry a one
year warrantee.
HIGH VOLTAGE POWER SOLUTIONS, INC. reserves the right to make changes in
these specifications at any time and without notice in order to supply the best product
possible.
¤ 2002 x HIGH VOLTAGE POWER SYSTEMS, INC. x Printed in U.S.A.
SPECIFICATIONS and STANDARDS
TECHNOLOGY: Metal Oxide Varistors (MOV) each
line to neutral/ground.
PEAK SURGE CURRENT: (8x20uS) 25,000 Amps
M C O V: 175 VAC rms (Line to Neutral).
ENCLOSURE: Black molded flame retardant plastic
housing with 1/2" x 20 threaded nipple. The
housing is weatherproof and UV resistant.
ENCAPSULATION: UL component recognized epoxy
potting material.
WIRING: Two12 gauge stranded color coded leads.
Black for line.
White for neutral/ground.
OPERATION TEMPERATURE: -40qC to +85qC
RESPONSE TIME: <5ns
CURRENT DRAIN: <100uA
UNIT WEIGHT: 7.5 ounces
SHIPPING WEIGHT: per arrester 8.5 ounces
per carton (12) 6.75 lbs.
per case (48) 28.5 lbs
ANSI : C62.11-1987 (Formerly IEEE Std. 587-1980)
PO Box 700968 Ɣ Dallas TX 75370
Ph (972) 248-7691 Ɣ Fax (972) 381-9998


Part Number HE300
Description SECONDARY SURGE
Maker High Voltage Power Solutions
PDF Download

HE300 Datasheet PDF





Similar Datasheet

1 HE300 SECONDARY SURGE
High Voltage Power Solutions





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy