HD66215T Datasheet | Hitachi Semiconductor

Description The HD66215T is a mon driver for a large dot matrix liquid crystal graphic display (LCD). The driver’s 100 channels can be divided into two groups of 50 channels by selecting data input/ output pins. Outputs X1 to X10 and X91 to X100 can be disabled by mode selection. Unused output pins can be equally distributed above and below the pins used for the LCD panel so that the panel can be neatly centered on the LCD board. A 101channel output mode can also be selected for an application to various display panels. The driver is powered by about 3V, making it suitable for battery-driven portable equipment featuring the low power dissipation of liquid crystal elements. The HD66215T, packaged in a micro-tape carrier package (micro-TCP), allows design of a pact LCD system with a frame (an area peripheral to the LCD panel) about half the width of conventional systems. Features - Duty cycle: About 1/64 to 1/240 - 100 internal LCD drive circuits (101-channel mode can be selected for a 101-output version) - High output voltage for driving the LCD: 10 to 28 V - Output division function (50 × 2-output) - 10-output through modes - 101-output mode - Display off function - Internal 100-bit shift register - Various LCD controller interfaces - LCTC series: HD63645, HD64645, HD64646 - LVIC series: HD66840, HD66841 - CLINE: HD66850 - Micro-TCP with 3-sprocket-hole width - Operating voltage: 2.5 to 5.5 V Ordering Information Type No. Outer Lead Pitch 1 Outer Lead Pitch 2 Device Length HD66215TA0 0.23 mm 1.20 mm 3 sprocket holes HD66215TA1 0.22 mm 1.00 mm 3 sprocket holes HD66215TA2 0.18 mm 0.85 mm 3 sprocket holes Notes: 1. 2. 3. 4. 5. 6. 7. Outer lead pitch 1 is for LCD drive output pins, and outer lead pitch 2 for the other pins. Device length includes test pad areas. Spacing between two sprocket holes is 4.75 mm. Tape film is Upirex (a trademark of Ube Industries, Ltd.). 35-mm-wide tape is used. Leads are plated with Sn. The details of TCP pattern are...