Datasheet4U Logo Datasheet4U.com

HA17008RFP - 8-Bit Multiplying Digital to Analog Converter

Description

The HA17008R series are 8-bit monolithic D/A converters which have built in, a reference current amplifier, an R-2R ladder resistor, and 8 high speed current switches.

By setting the reference voltage and resistance, the maximum output current can be freely varied in response to the application.

Features

  • Linearity of ±0.19% (±1/2 LSB) guaranteed. The settling time is short, 85 ns (typ), enabling rapid conversions. Low power dissipation has been reduced: 135 mW typ. Compatible with TTL and CMOS logic. The standard supply voltage is VCC = +15.0 V, VEE =.
  • 15.0 V. A wide output voltage range can be provided. From.
  • 10 V to +18 V. Ordering Information Type No. HA17008RP HA17008RFP Package DP-16 FP-16DA HA17008RP/RFP Pin Arra.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HA17 1.0 AMP.HIGH EFFICIENCY RECTIFIERS Jinan Gude Electronic Device
HA17324A Quad Operational Amplifier Renesas
HA17339A Quadruple Comparators Renesas Technology
HA17358A Dual Operational Amplifier Renesas Technology
HA17358B Dual Operational Amplifier Renesas Technology

Other Datasheets by Hitachi Semiconductor (now Renesas)

Part Number Description
HA17008RP 8-Bit Multiplying Digital to Analog Converter
HA17012 12-BIT MULTIPLAYING DIGITA-TO-ANALOG CONVERTER
HA17080 J-FET Input Operational Amplifiers
HA17082 J-FET Input Operational Amplifiers
HA17083 J-FET Input Operational Amplifiers

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com HA17008RP/RFP 8-Bit Multiplying Digital to Analog Converter ADE-204-060 (Z) Rev. 0 Dec. 2000 Description The HA17008R series are 8-bit monolithic D/A converters which have built in, a reference current amplifier, an R-2R ladder resistor, and 8 high speed current switches. By setting the reference voltage and resistance, the maximum output current can be freely varied in response to the application. The reference current is distributed to the current value for each bit by the R-2R ladder resistor, and the maximum output current is 255/256 of the reference current. For example, if the input reference current is 2.0 mA, then the maximum available output current is 1.992 mA.
Published: |