HMC364 Datasheet | Hittite Microwave Corporation

Features Ultra Low SSB Phase Noise: -145 d Bc/Hz Wide Bandwidth Output Power: 4 d Bm Single DC Supply: +5V Small Size: 0.686 mm x 1.143 mm Typical Applications Prescaler for DC to Ku Band PLL Applications: - Satellite munication Systems - Fiber Optic FREQ. DIVIDERS - CHIP - Pt-Pt and Pt-MPt Radios - VSAT Functional Diagram General Description The HMC364 is a low noise Divide-by-2 Static Divider with In Ga P Ga As HBT technology that has a small size of 0.686 mm x 1.143 mm. This device operates from DC (with a square wave input) to 13 GHz input frequency with a single +5.0V DC supply. The low additive SSB phase noise of -145 d Bc/Hz at 100 k Hz offset helps the user maintain good system noise performance. Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc= 5V Parameter Maximum Input Frequency Minimum Input Frequency Input Power Range Sine Wave Input. [1] Fin = 1 to 10 GHz Fin = 10 to 12 GHz Fin = 12 to 13 GHz Output Power [2] Fin = 6 GHz Fin = 9 GHz Fin = 11 GHz Fin = 13 GHz Reverse Leakage SSB Phase Noise (100 k Hz offset) Output Transition Time Supply Current (Icc) [2] Both RF Outputs Terminated Pin = 0 d Bm, Fin = 6 GHz Pin = 0 d Bm, Fout = 882 MHz -15 -10 -4 1 -2 -5 -9 40 -145 100 105 Conditions Min. 13 Typ. 14 0.2 >-20 >-15 >-8 4 0.5 +10 +5 +2 Max. Units GHz GHz d Bm d Bm d Bm d Bm d Bm d Bm d Bm d B d Bc/Hz ps m A 1. Divider will operate down to DC for square-wave input signal. 2. When operating in high power mode (pin 10 connected to ground). For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at .hittite. - 20 MICROWAVE CORPORATION v02.1202 Ga As HBT MMIC DIVIDE-BY-2, DC - 13.0 GHz Ga As MMIC SUB-HARMONICALLY PUMPED MIXER - 25 GHz Input Sensitivity Window, T= 25 °C Input Sensitivity Window17 vs. Temperature 20 20 10 10 INPUT POWER (d Bm) Remended Operating Window INPUT POWER (d Bm) -10 -10 Min Pin +25 C Max Pin +25...