HT7L2103 Datasheet | Holtek Semiconductor

.DataSheet.co.kr HT7L2103 Anti-EMI, High Efficiency Dimmable LED Lighting Driver with Primary-Side Constant Control and Green Mode Feature - Frequency Jitter for EMI Restriction - Integrated Soft-Start Function - Very Low Operating Current and Start-up Current (<20mA) for satisfying Energy-Star 2.0 "No-Load Mode" (Stand-by) Power standard - ±5% Trimmed Precision Oscillator - Non-Audible-Noise Green Mode Control to maintain efficiency for both Light and Heavy Loads - LEB (Leading-Edge Blanking) on CS Pin - Internal Slope pensation - Cycle-by-Cycle Current Limiting - Short-Circuit-Protection(SCP) for Short-Circuit and Over-Load Condition - Over-Voltage-Protection(OVP) on VCC Pin - Internal Over-Temperature-Protection(OTP) - 1~99% PWM Dimming Range - 8-pin SOP package General Description The HT7L2103 is an advanced, highly integrated LED Lighting Driver using an AC-DC isolation topology. The device provides many protection functions and uses ultra low power circuit design, and is optimized to restrict EMI. By integrating a special multi-function interface, this device can be used for different LED power topologies such as Primary Feedback Isolation Flyback, Secondary Feedback Isolation Flyback, DC-DC Buck/Boost/ BuckBoost. This device also integrates various protection functions for LED Lighting requirements such as Cycle-by-Cycle Current Limiting, Short-Circuit Protection (SCP), Over-Voltage Protection (OVP), Internal Over-Temperature Protection (OTP), and a Soft-Start function to reduce inrush currents during LED power system initialization for the prevention of device burn-out. The HT7L2103 provides a 1~99% PWM Dimming Range with duty-cycle scale precision lower than 1%. Applications - Isolation AC-DC LED Lighting - AC-DC Switching Power...