SDP8314 Datasheet | Honeywell

FEATURES - Side-looking plastic package - 55¡ (nominal) acceptance angle - TTL/LSTTL/CMOS patible - Open collector output - Buffer (SDP8304) or inverting (SDP8314) logic available - High noise immunity output - Mechanically and spectrally matched to SEP8506 and SEP8706 infrared emitting diodes INFRA--8.TIF DESCRIPTION The SDP8304/8314 series consists of a high speed IC molded in a side-looking black plastic package to minimize the effect of visible ambient light. The detector incorporates a Schmitt trigger which provides pulse shaping and hysteresis for noise immunity. Output rise and fall times are independent of rate of change of incident light. Detector sensitivity has been internally temperature pensated. The output stage is an open collector NPN transistor. This configuration allows the sensor to interface with circuit elements driven by supply voltages other than the VÙÙ supply. For additional output configuration options refer to SDP8004/8014 and SDP8604/8614. Device Polarity: Buffer - Output is HI when incident light intensity is above the turn- on threshold level. Inverter - Output is LO when incident light intensity is above the turn- on threshold level. OUTLINE DIMENSIONS in inches (mm) Tolerance 3 plc decimals ±0.005(0.12) 2 plc decimals ±0.020(0.51) .175 (4.45) .060 (1.52) .030 (0.76) .060 (1.52) .045 (1.14) .020 SQ. 3 PLCS (0.51) .225 (5.72) GND Vo ~ ~ ~ ~ ~ Vcc ~ .045(1.14) .025(.64) ~ ~ .500 MIN (12.71) .075 (1.91) 0.150 (3.81) DIM_026.ds4 188 h Honeywell reserves the right to make changes in order to improve design and supply the best products possible. SDP8304/8314 Optoschmitt Detector Open-Collector Output ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS ABSOLUTE MAXIMUM RATINGS (25¡C Free-Air Temperature unless otherwise noted) Supply Voltage Duration of Output Short to VÙÙ or Ground Applied Output Voltage Low Level Output Current Irradiance Operating Temperature Range Storage Temperature Range...