900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Honeywell International Electronic Components Datasheet

SDP8610 Datasheet

Optoschmitt Detector

No Preview Available !

SDP86XX
Optoschmitt Detector
FEATURES
Side-looking plastic package
55¡ (nominal) acceptance angle
Wide sensitivity ranges
TTL/LSTTL/CMOS compatible
Buffer (SDP8600/8601/8602) or inverting
(SDP8610/8611/8612) logic available
Three different lead spacing arrangements
Mechanically and spectrally matched to
SEP8506 and SEP8706 infrared emitting diodes
DESCRIPTION
The SDP86XX series is a family of single chip
Optoschmitt IC detectors molded in a side-looking black
plastic package to minimize the effect of visible ambient
light. The photodetector consists of a photodiode,
amplifier, voltage regulator, Schmitt trigger and an NPN
output transistor with a 10 kì (nominal) pull-up resistor.
Output rise and fall times are independent of the rate of
change of incident light. Detector sensitivity has been
internally temperature compensated. Flexibility of use is
enhanced by a choice of three different lead
configurations; in-line (SDP8601/8611), 0.05
in.(1.27 mm) offset pin circle (SDP8600/8610) and 0.10
in. (2.54 mm) offset center lead (SDP8602/8612).
Device Polarity:
Buffer - Output is HI when incident light intensity is
above the turn- on threshold level.
Inverter - Output is LO when incident light intensity is
above the turn- on threshold level.
INFRA--6.TIF
OUTLINE DIMENSIONS in inches (mm)
Tolerance 3 plc decimals ±0.005(0.12)
2 plc decimals ±0.020(0.51)
DIM_028.cdr
200
h
Honeywell reserves the right to make
changes in order to improve design and
supply the best products possible.


Honeywell International Electronic Components Datasheet

SDP8610 Datasheet

Optoschmitt Detector

No Preview Available !

SDP86XX
Optoschmitt Detector
ELECTRICAL CHARACTERISTICS
PARAMETER
SYMBOL MIN TYP MAX UNITS
TEST CONDITIONS
ABSOLUTE MAXIMUM RATINGS
(25¡C Free-Air Temperature unless otherwise noted)
Supply Voltage
12 V [À]
Duration of Output
Short to VÙÙ or Ground
1.0 sec
Output Current
18 mA
Operating Temperature Range
-40¡C to 85¡C
Storage Temperature Range
-40¡C to 85¡C
Soldering Temperature (5 sec)
240¡C
Notes
1. Derate linearly from 25¡C to 5.5 V at 85¡C.
SCHEMATIC
Honeywell reserves the right to make
changes in order to improve design and
supply the best products possible.
h
201


Part Number SDP8610
Description Optoschmitt Detector
Maker Honeywell
Total Page 4 Pages
PDF Download

SDP8610 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 SDP8610 Optoschmitt Detector
Honeywell





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy