SDX15A2 Datasheet | Honeywell

Features q Low Cost DIP q Precision Temperature pensation q Calibrated Zero & Span q Small Size q Low Noise q High Impedance for Low Power Applications q Prime Grade Available (SDXxxxyy-A) Due to regional agency approval requirements, some products may not be available in your area. Please contact your regional Honeywell office regarding your product of choice. Typical Applications q Medical Equipment q puter Peripherals q Pneumatic Controls q HVAC Description The SDX series sensors provide a very cost effective solution for pressure applications that require small size plus performance. These calibrated and temperature pensated sensors give an accurate and stable output over a 0 °C to 50 °C [32 °F to 122 °F] temperature range. This series is intended for use with noncorrosive, non-ionic working fluids such as air, dry gases and the like. Devices are available to measure absolute and gage pressures from 1 psi (SDX01) up to 100 psi (SDX100). The absolute devices have an internal vacuum reference and an output voltage proportional to absolute pressure. SDX Sensors are available in standard mercial and prime grades file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20SDX15A2.htm (1 of 6)14/03/2005 12:28:30 ã Datasheet -- SDX15A2 (SDCxxxyy - A) to allow optimization of accuracy and cost in any given application. The SDX devices feature an integrated circuit (IC) sensor element and laser trimmed thick film ceramic housed in a pact solvent resistant case. The package is a double-wide (i.e. 0.600 inches lead spacing) dual-inline package (DIP). This is the same familiar package used by IC manufacturers except it is only 11,94 mm [0.470 in] long and has a pressure port(s). The pc board area used by each DIP is approximately 0.26 in x 0.26 in. This extremely small size enables the use of multiple sensors in limited available space. The DIP provides excellent corrosion resistance and isolation to external package stress. The DIP mounts on a pc board like...