Datasheet4U Logo Datasheet4U.com

AT7252 - 2A 20V Synchronous Step-Down Converter

General Description

4.5V to 20V input voltage range 2A load current capability Up to 95% efficiency High efficiency at light load Fixed 500KHz Switching frequency Input under voltage lockout Start-up current run-away protection Over current protection and Hiccup Thermal protection Available in TSOT-26 package APPLICAT

Key Features

  • Immense Advance Tech.

📥 Download Datasheet

Datasheet Details

Part number AT7252
Manufacturer IAT
File Size 118.93 KB
Description 2A 20V Synchronous Step-Down Converter
Datasheet download datasheet AT7252 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AT726 PHASE CONTROL THYRISTOR Power Semiconductors
AT704 PHASE CONTROL THYRISTOR Power Semiconductors
AT706 PHASE CONTROL THYRISTOR Power Semiconductors
AT708 PHASE CONTROL THYRISTOR Power Semiconductors
AT71200M 8M-pixel Color Image Sensor ATMEL Corporation

Other Datasheets by IAT

Part Number Description
AT7200 18V/2A Sync Step-Down Converter
AT7240 2MHz Synchronous Step-Down Converter
AT7241 2MHz Synchronous Step-Down Converter
AT7109 800mA Synchronous Step-Down Converter
AT7170 1A 1.5MHz Step-Down Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AT7252 2A, 20V Synchronous Step-Down Converter FEATURES Immense Advance Tech. DESCRIPTION 4.5V to 20V input voltage range 2A load current capability Up to 95% efficiency High efficiency at light load Fixed 500KHz Switching frequency Input under voltage lockout Start-up current run-away protection Over current protection and Hiccup Thermal protection Available in TSOT-26 package APPLICATION AT7252 develops high efficiency synchronous step-down DC-DC converter capable of delivering 2A load current. AT7252 operates over a wide input voltage range from 4.5V to 20V. It also integrates main switch and synchronous switch with very low RDS(ON) to minimize the conduction loss. At light loads, regulators operate in low frequency to maintain high efficiency and low output ripple.