CMOS ASYNCHRONOUS FIFO
256 x 9, 512 x 9 and 1,024 x 9
IDT7200L
IDT7201LA
IDT7202LA
LEAD FINISH (SnPb) ARE IN EOL PROCESS - LAST TIME BUY EXPIRES JUNE 15, 2018
FEATURES:
• First-In/First-Out dual-port memory
• 256 x 9 organization (IDT7200)
• 512 x 9 organization (IDT7201)
• 1,024 x 9 organization (IDT7202)
• Low power consumption
— Active: 440mW (max.)
—Power-down: 28mW (max.)
• Ultra high speed—12ns access time
• Asynchronous and simultaneous read and write
• Fully expandable by both word depth and/or bit width
• 720x family is pin and functionally compatible from 256 x 9 to 64k x 9
• Status Flags: Empty, Half-Full, Full
• Auto-retransmit capability
• High-performance CEMOS™ technology
• Military product compliant to MIL-STD-883, Class B
• Standard Military Drawing #5962-87531, 5962-89666, 5962-89863
and 5962-89536 are listed on this function
• Dual versions available in the TSSOP package. For more informa-
tion, see IDT7280/7281/7282 data sheet
IDT7280 = 2 x IDT7200
IDT7281 = 2 x IDT7201
IDT7282 = 2 x IDT7202
• Industrial temperature range (–40oC to +85oC) is available
(plastic packages only)
• Green parts available, see ordering information
DESCRIPTION:
The IDT7200/7201/7202 are dual-port memories that load and empty data
onafirst-in/first-outbasis. ThedevicesuseFullandEmptyflagstopreventdata
overflow and underflow and expansion logic to allow for unlimited expansion
capability in both word size and depth.
The reads and writes are internally sequential through the use of ring
pointers, with no address information required to load and unload data. Data
is toggled in and out of the devices through the use of the Write (W) and Read
(R) pins.
The devices utilize a 9-bit wide data array to allow for control and parity bits
at the user’s option. This feature is especially useful in data communications
applications where it is necessary to use a parity bit for transmission/reception
errorchecking. ItalsofeaturesaRetransmit(RT)capabilitythatallowsforreset
of the read pointer to its initial position when RT is pulsed LOW to allow for
retransmission from the beginning of data. A Half-Full Flag is available in the
single device mode and width expansion modes.
These FIFOs are fabricated using high-speed CMOS technology. They
are designed for those applications requiring asynchronous and simultaneous
read/writes in multiprocessing and rate buffer applications. Military grade
product is manufactured in compliance with MIL-STD-883, Class B.
FUNCTIONAL BLOCK DIAGRAM
W
WRITE
CONTROL
DATA INPUTS
(D0-D8)
WRITE
POINTER
RAM
ARRAY
256 x 9
512 x 9
1,024 x 9
READ
POINTER
R
READ
CONTROL
THREE-
STATE
BUFFERS
DATA OUTPUTS
(Q0-Q8)
FLAG
LOGIC
EF
FF
RS
RESET
LOGIC
FL/RT
EXPANSION
XI
LOGIC
XO/HF
2679 drw 01
IDT and the IDT logo are registered trademarks of Integrated Device Technology, Inc.
COMMERCIAL, INDUSTRIAL AND MILITARY TEMPERATURE RANGES
1
©2017 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice.
NOVEMBER 2017
DSC-2679/15
