900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






IK Semiconductor

IN74AC373 Datasheet Preview

IN74AC373 Datasheet

Octal D-Type Latch

No Preview Available !

TECHNICAL DATA
Octal 3-State Noninverting
Transparent Latch
High-Speed Silicon-Gate CMOS
IN74AC373
The IN74AC373 is identical in pinout to the LS/ALS373,
HC/HCT373. The device inputs are compatible with standard CMOS
outputs; with pullup resistors, they are compatible with LS/ALS outputs.
These latches appear transparent to data (i.e., the outputs change
asynchronously) when Latch Enable is high. When Latch Enable goes
low, data meeting the setup and hold time becomes latched.
The Output Enable input does not affect the state of the latches, but
when Output Enable is high, all device outputs are forced to the high-
impedance state. Thus, data may be latched even when the outputs are not
enabled.
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 2.0 to 6.0 V
Low Input Current: 1.0 µA; 0.1 µA @ 25°C
High Noise Immunity Characteristic of CMOS Devices
Outputs Source/Sink 24 mA
ORDERING INFORMATION
IN74AC373N Plastic
IN74AC373DW SOIC
TA = -40° to 85° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
www.datasheet4u.cPoPININm1020==GVNCCD
FUNCTION TABLE
Inputs
Output Latch D
Enable Enable
L HH
L HL
L LX
H XX
X = Don’t Care
Z = High Impedance
Output
Q
H
L
No Change
Z
1




IK Semiconductor

IN74AC373 Datasheet Preview

IN74AC373 Datasheet

Octal D-Type Latch

No Preview Available !

IN74AC373
MAXIMUM RATINGS*
Symbol
Parameter
Value
VCC
VIN
VOUT
IIN
IOUT
ICC
PD
DC Supply Voltage (Referenced to GND)
DC Input Voltage (Referenced to GND)
DC Output Voltage (Referenced to GND)
DC Input Current, per Pin
DC Output Sink/Source Current, per Pin
DC Supply Current, VCC and GND Pins
Power Dissipation in Still Air, Plastic DIP+
SOIC Package+
-0.5 to +7.0
-0.5 to VCC +0.5
-0.5 to VCC +0.5
±20
±50
±50
750
500
Tstg Storage Temperature
-65 to +150
TL Lead Temperature, 1 mm from Case for 10 Seconds
(Plastic DIP or SOIC Package)
260
*Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
+Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C
SOIC Package: : - 7 mW/°C from 65° to 125°C
Unit
V
V
V
mA
mA
mA
mW
°C
°C
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
VCC
VIN, VOUT
DC Supply Voltage (Referenced to GND)
DC Input Voltage, Output Voltage (Referenced to GND)
TJ Junction Temperature (PDIP)
TA Operating Temperature, All Package Types
IOH Output Current - High
IOL Output Current - Low
tr, tf Input Rise and Fall Time *
(except Schmitt Inputs)
* VIN from 30% to 70% VCC
VCC =3.0 V
VCC =4.5 V
VCC =5.5 V
Min Max Unit
2.0 6.0
V
0 VCC V
140 °C
-40 +85 °C
-24 mA
24 mA
0 150 ns/V
0 40
0 25
This device contains protection circuitry to guard against damage due to high static voltages or electric fields.
However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this
high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range GND(VIN or
VOUT)VCC.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused
outputs must be left open.
2


Part Number IN74AC373
Description Octal D-Type Latch
Maker IK Semiconductor
Total Page 6 Pages
PDF Download

IN74AC373 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 IN74AC373 Octal D-Type Latch
IK Semiconductor
2 IN74AC374 Octal D-Type Flip-Flop
IK Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy