datasheet4u.com

900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf





IK Semiconductor
IK Semiconductor

IN74HC4053A Datasheet Preview

IN74HC4053A Datasheet

Tripple 2-Channel Analog Multiplexer/Demultiplexer

No Preview Available !

IN74HC4053A pdf
TECHNICAL DATA
Analog Multiplexer/Demultiplexer
High-Performance Silicon-Gate CMOS
IN74HC4053A
The IN74HC4053A utilize silicon-gate CMOS technology to achieve
fast propagation delays, low ON resistances, and low OFF leakage
currents. These analog multiplexers/demultiplexers control analog
voltages that may vary across the complete power supply range (from VCC
to VEE).
The Channel-Select inputs determine which one of the Analog
Inputs/Outputs is to be connected, by means of an analog switch, to the
Common Output/Input.When the Enable pin is high, all analog switches
are turned off.
The Channel-Select and Enable inputs are compatible with standard
CMOS outputs; with pullup resistors, they are compatible with
LS/ALSTTL outputs.
Fast Switching and Propagation Speeds
Low Crosstalk Between Switches
Diode Protection on All Inputs/Outputs
Analog Power Supply Range (VCC-VEE)=2.0 to 12.0 V
Digital (Control) Power Supply Range (VCC-GND)=2.0 to 6.0 V
Low Noise
ORDERING INFORMATION
IN74HC4053AN Plastic
IN74HC4053ADW SOIC
TA = -55° to 125° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
Triple Single-Pole, Double-Position
Plus Common Off
omPIN 16 =VCC
.cPIN 7 = VEE
www.datasheet4u PIN 8 = GND
FUNCTION TABLE
Control Inputs
Enable Select
CBA
L LLL
L LLH
L LHL
L LHH
L HLL
L HLH
L HHL
L HHH
H XXX
X = don’t care
ON
Channels
Z0 Y0 X0
Z0 Y0 X1
Z0 Y1 X0
Z0 Y1 X1
Z1 Y0 X0
Z1 Y0 X1
Z1 Y1 X0
Z1 Y1 X1
None
1



IK Semiconductor
IK Semiconductor

IN74HC4053A Datasheet Preview

IN74HC4053A Datasheet

Tripple 2-Channel Analog Multiplexer/Demultiplexer

No Preview Available !

IN74HC4053A pdf
IN74HC4053A
MAXIMUM RATINGS*
Symbol
Parameter
Value
VCC Positive DC Supply Voltage (Referenced to GND)
(Referenced to VEE)
VEE Negative DC Supply Voltage (Referenced to GND)
VIS Analog Input Voltage
VIN Digital Input Voltage (Referenced to GND)
I DC Input Current Into or Out of Any Pin
-0.5 to +7.0
-0.5 to +14.0
-7.0 to +0.5
VEE - 0.5 to VCC+0.5
-1.5 to VCC +1.5
±25
PD Power Dissipation in Still Air, Plastic DIP+
SOIC Package+
750
500
Tstg Storage Temperature
-65 to +150
TL Lead Temperature, 1 mm from Case for 10 Seconds
(Plastic DIP or SOIC Package)
260
*Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
+Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C
SOIC Package: : - 7 mW/°C from 65° to 125°C
Unit
V
V
V
V
mA
mW
°C
°C
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min Max Unit
VCC Positive Supply Voltage (Referenced to GND)
(Referenced to VEE)
VEE Negative DC Supply Voltage (Referenced to GND)
VIS Analog Input Voltage
VIN Digital Input Voltage (Referenced to GND)
VIO* Static or Dynamic Voltage Across Switch
TA Operating Temperature, All Package Types
2.0
2.0
- 6.0
VEE
GND
-
-55
6.0
12.0
GND
VCC
VCC
1.2
+125
V
V
V
V
V
°C
tr, tf Input Rise and Fall Time (Channel Select VCC =2.0 V
0 1000 ns
or Enable Inputs)
VCC =4.5 V
0 500
VCC =6.0 V
0 400
* For voltage drops across the switch greater than 1.2 V (switch on), excessive VCC current may be drawn;
i. e., the current out of the switch may contain both VCC and switch input components. The reliability of the device
will be unaffected unless the Maximum Ratings are exceeded.
This device contains protection circuitry to guard against damage due to high static voltages or electric fields.
However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this
high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range indicated in the
Recommended Operating Conditions..
Unused digital input pins must always be tied to an appropriate logic voltage level (e.g., either GND or VCC).
Unused Analog I/O pins may be left open or terminated.
2


Part Number IN74HC4053A
Description Tripple 2-Channel Analog Multiplexer/Demultiplexer
Maker IK Semiconductor
Total Page 9 Pages
PDF Download
IN74HC4053A pdf
IN74HC4053A Datasheet PDF
[partsNo] view html
View PDF for Mobile








Similar Datasheet

1 IN74HC4053A Tripple 2-Channel Analog Multiplexer/Demultiplexer IK Semiconductor
IK Semiconductor
IN74HC4053A pdf





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy