900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






IK Semiconductor

IN74HCT241A Datasheet Preview

IN74HCT241A Datasheet

Octal Buffer/Line Driver

No Preview Available !

TECHNICAL DATA
Octal 3-State Noninverting Buffer/Line
Driver/Line Receiver
High-Performance Silicon-Gate CMOS
IN74HCT241A
The IN74HCT241A is identical in pinout to the LS/ALS241. The
IN74HCT241A may be used as a level converter for interfacing TTL or
NMOS outputs to High Speed CMOS inputs.
This octal noninverting buffer/line driver/line receiver is designed to
be used with 3-state memory address drivers, clock drivers, and other
bus-oriented systems. The device has noninverting outputs and two
output enables. Enable A is active-low and Enable B is active-high.
TTL/NMOS Compatible Input Levels
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 4.5 to 5.5 V
Low Input Current: 1.0 µA
ORDERING INFORMATION
IN74HCT241AN Plastic
IN74HCT241ADW SOIC
TA = -55° to 125° C for all packages
LOGIC DIAGRAM
PIN ASSIGNMENT
www.datasheet4u.PcPINIoN1m020==GVNCCD
FUNCTION TABLE
Inputs
Output
Enable A
A
YA
LLL
LHH
HXZ
X = don’t care
Z = high impedance
Inputs
Enable B
B
HL
HH
LX
Output
YB
L
H
Z
1




IK Semiconductor

IN74HCT241A Datasheet Preview

IN74HCT241A Datasheet

Octal Buffer/Line Driver

No Preview Available !

IN74HCT241A
MAXIMUM RATINGS*
Symbol
Parameter
Value
VCC
VIN
VOUT
IIN
IOUT
ICC
PD
DC Supply Voltage (Referenced to GND)
DC Input Voltage (Referenced to GND)
DC Output Voltage (Referenced to GND)
DC Input Current, per Pin
DC Output Current, per Pin
DC Supply Current, VCC and GND Pins
Power Dissipation in Still Air, Plastic DIP+
SOIC Package+
-0.5 to +7.0
-1.5 to VCC +1.5
-0.5 to VCC +0.5
±20
±35
±75
750
500
Tstg Storage Temperature
-65 to +150
TL Lead Temperature, 1 mm from Case for 10 Seconds
(Plastic DIP or SOIC Package)
260
*Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
+Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C
SOIC Package: : - 7 mW/°C from 65° to 125°C
Unit
V
V
V
mA
mA
mA
mW
°C
°C
RECOMMENDED OPERATING CONDITIONS
Symbol
VCC
VIN, VOUT
TA
tr, tf
Parameter
DC Supply Voltage (Referenced to GND)
DC Input Voltage, Output Voltage (Referenced to GND)
Operating Temperature, All Package Types
Input Rise and Fall Time (Figure 1)
Min Max Unit
4.5 5.5
V
0 VCC V
-55 +125 °C
0 500 ns
This device contains protection circuitry to guard against damage due to high static voltages or electric fields.
However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this
high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range GND(VIN or
VOUT)VCC.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused
outputs must be left open.
2


Part Number IN74HCT241A
Description Octal Buffer/Line Driver
Maker IK Semiconductor
Total Page 6 Pages
PDF Download

IN74HCT241A Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 IN74HCT241A Octal Buffer/Line Driver
IK Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy