900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






IK Semiconductor

IN74HCT374A Datasheet Preview

IN74HCT374A Datasheet

Octal D-Type Flip-Flop

No Preview Available !

TECHNICAL DATA
Octal 3-State
Noninverting D Flip-Flop
High-Performance Silicon-Gate CMOS
IN74HCT374A
The IN74HCT374A is identical in pinout to the LS/ALS374.
The IN74HCT374A may be used as a level converter for interfacing
TTL or NMOS outputs to High-Speed CMOS inputs.
Data meeting the setup and hold time is clocked to the outputs with
the rising edge of the Clock. The Output Enable input does not affect the
states of the flip-flops, but when Output Enable is high, the outputs are
forced to the high-impedance state; thus, data may be stored even when
the outputs are not enabled.
TTL/NMOS-Compatible Input Levels
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 4.5 to 5.5 V
Low Input Current: 1.0 µA
ORDERING INFORMATION
IN74HCT374AN Plastic
IN74HCT374ADW SOIC
TA = -55° to 125° C for all packages
LOGIC DIAGRAM
PIN ASSIGNMENT
PIN 20=VCC
PIN 10 = GND
www.datasheet4u.com
FUNCTION TABLE
Output
Enable
L
L
L
Inputs
Clock
L,H,
HX
X = don’t care
Z = high impedance
Output
DQ
HH
LL
X no
change
XZ
1




IK Semiconductor

IN74HCT374A Datasheet Preview

IN74HCT374A Datasheet

Octal D-Type Flip-Flop

No Preview Available !

IN74HCT374A
MAXIMUM RATINGS*
Symbol
Parameter
Value
VCC
VIN
VOUT
IIN
IOUT
ICC
PD
DC Supply Voltage (Referenced to GND)
DC Input Voltage (Referenced to GND)
DC Output Voltage (Referenced to GND)
DC Input Current, per Pin
DC Output Current, per Pin
DC Supply Current, VCC and GND Pins
Power Dissipation in Still Air, Plastic DIP+
SOIC Package+
-0.5 to +7.0
-1.5 to VCC +1.5
-0.5 to VCC +0.5
±20
±35
±75
750
500
Tstg Storage Temperature
-65 to +150
TL Lead Temperature, 1 mm from Case for 10 Seconds
(Plastic DIP or SOIC Package)
260
*Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
+Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C
SOIC Package: : - 7 mW/°C from 65° to 125°C
Unit
V
V
V
mA
mA
mA
mW
°C
°C
RECOMMENDED OPERATING CONDITIONS
Symbol
VCC
VIN, VOUT
TA
tr, tf
Parameter
DC Supply Voltage (Referenced to GND)
DC Input Voltage, Output Voltage (Referenced to GND)
Operating Temperature, All Package Types
Input Rise and Fall Time (Figure 1)
Min Max Unit
4.5 5.5
V
0 VCC V
-55 +125 °C
0 500 ns
This device contains protection circuitry to guard against damage due to high static voltages or electric fields.
However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this
high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range GND(VIN or
VOUT)VCC.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused
outputs must be left open.
2


Part Number IN74HCT374A
Description Octal D-Type Flip-Flop
Maker IK Semiconductor
Total Page 6 Pages
PDF Download

IN74HCT374A Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 IN74HCT374A Octal D-Type Flip-Flop
IK Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy