MBR1635/ MBR1645, MBRB1635/ MBRB1645
Bulletin PD-2.319 rev. C 01/03
Voltage Ratings
Part number
VR Max. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V)
MBR1635
35
MBR1645
45
Absolute Maximum Ratings
Parameters
IF(AV) Max. Average Forward Current
IFSM Non-Repetitive Peak Surge Current
EAS Non-RepetitiveAvalancheEnergy
IAR RepetitiveAvalancheCurrent
MBR16.. Units
Conditions
16
1800
150
24
3.6
A @ TC = 125 °C, (Rated VR)
Following any rated load
5µs Sine or 3µs Rect. pulse condition and with rated
A VRRM applied
Surge applied at rated load condition halfwave single
phase 60Hz
mJ TJ = 25 °C, IAS = 3.6 Amps, L = 3.7 mH
A Current decaying linearly to zero in 1 µsec
Frequency limited by TJ max. VA = 1.5 x VR typical
Electrical Specifications
Parameters
VFM Max. Forward Voltage Drop(1)
IRM Max. Instantaneus Reverse Current
(1)
CT Max. Junction Capacitance
LS Typical Series Inductance
dv/dt Max. Voltage Rate of Change
(Rated VR)
(1) Pulse Width < 300µs, Duty Cycle <2%
MBR16.. Units
Conditions
0.63
0.57
0.2
40
1400
8.0
10000
V @ 16A
TJ = 25 °C
V @ 16A
TJ = 125 °C
mA TJ = 25 °C
mA TJ = 125 °C
Rated DC voltage
pF VR = 5VDC, (test signal range 100Khz to 1Mhz) 25°C
nH Measured from top of terminal to mounting plane
V/ µs
Thermal-Mechanical Specifications
Parameters
MBR16.. Units
Conditions
TJ Max. Junction Temperature Range
Tstg Max. Storage Temperature Range
RthJC Max. Thermal Resistance Junction
to Case
RthCS Typical Thermal Resistance, Case
to Heatsink
wt Approximate Weight
T MountingTorque
Min.
Max.
Case Style
-65 to 150 °C
-65 to 175 °C
1.50 °C/W DCoperation
0.50 °C/W Mounting surface, smooth and greased
2 (0.07) g (oz.)
6 (5) Kg-cm
12 (10) (Ibf-in)
TO-220AC JEDEC
2 www.irf.com
