Part number:
SW7201
Manufacturer:
ISMARTWARE
File Size:
0.96 MB
Description:
I2c buck-boost charge-discharge controller.
* High-efficiency Buck-boost Charger
* Support buck-boost charging of 1 to 4 cells battery
* Support 3V-19.2V charging target voltage setting
* Support 100W input power
* Support 4V-24V input voltage
* Support I2C programming to control input/battery c
SW7201
ISMARTWARE
0.96 MB
I2c buck-boost charge-discharge controller.
📁 Related Datasheet
SW7203 - NVDC Buck-Boost Charge-Discharge Controller
(ISMARTWARE)
SW7203
NVDC Buck-Boost Charge-Discharge Controller
Narrow VDC High-efficiency Bidirectional BuckBoost Charge-Discharge Controller
1. Description
SW7.
SW7230 - Adaptive 100/120Hz Current Ripple Remover
(SEMIPOWER)
SW7230
Adaptive 100/120Hz Current Ripple Remover Max Input Current ≤1A
Parameters Subject to Change Without Notice
FEATURES
Ada.
SW70N10V - N-channel MOSFET
(Samwin)
SW70N10V
N-channel Enhanced mode TO-251/TO-252/TO-220 MOSFET
Features
High ruggedness Low RDS(ON) (Typ 12.4mΩ)@VGS=4.5V
Low RDS(ON) (Typ 11.7mΩ).
SW7125D - Ultra-Low Noise Amplifier
(SILICON wave)
SW7125D Datasheet
May 2017 V1.2
Ultra-Low Noise Amplifier for BDS/GPS/ Galileo
Global Navigation Satellite Systems (GNSS)
DESCRIPTION
The SW7125D .
SW7126D - Ultra-Low Noise Amplifier
(SILICON wave)
SW7126D Datasheet
May 2017 V1.2
Ultra-Low Noise Amplifier for BDS/GPS/ Galileo
Global Navigation Satellite Systems (GNSS)
DESCRIPTION
The SW7126D .
SW7135 - Fully-integrated Front-End Module
(SILICON wave)
SW7135 Datasheet
May 2017 V1.1
Fully-integrated Front-End Module with
BDS/GPS/GNSS Low-Noise Amplifier and Pre-Filter
DESCRIPTION
The SW7135 is a .
SW730 - N-Channel MOSFET
(SAMWIN)
..
SAMWIN
General Description Features
N-Channel MOSFET BVDSS (Minimum) RDS(ON) (Maximum) ID Qg (Typical) PD (@TC=25 ) : 400 V : 1.0.
SW740 - N-Channel MOSFET
(SAMWIN)
..
SAMWIN
General Description Features
N-Channel MOSFET BVDSS (Minimum) RDS(ON) (Maximum) ID Qg (Typical) PD (@TC=25 ) : 400 V : 0.5.
