M05VVTT
M05VVTT is MINIATURE CRYSTAL manufactured by ISOTEMP.
DESCRIPTION OF REVISION
- Redrawn on new form was dwg. 115-037.
DATE
02-10-2004
This M05VVTT specification covers input voltages from +5 VDC to +28 VDC and set point temperatures from +35°C to +95°C. The VV in the part number specifies the nominal operating voltage. If the voltage is less than +10 VDC, use a leading zero (i.e. for +5 VDC use VV = 05). The TT in the part number specifies the set point temperature in °C (i.e. for +75°C use TT = 75). VV and TT are used in this specification to describe the operation of this oven.
1. TEMPERATURE 1.1. Set point
1.2. Initial tolerance
+TT °C (Customer specified) (+35°C to +95°C) < ±3°C @ +25°C
2. STABILITY 2.1. Ambient 2.2. Voltage 2.3. Warm-up
< ±3°C from -30°C to (TT-10)°C < ±0.5°C/±10% change < ±1°C in 2 minutes @ +25°C (referenced to temperature at 15 minutes)
3. INPUT POWER
3.1. Voltage
+VV VDC (Customer specified)
(+5 VDC to +28 VDC)
3.2. Voltage tolerance
±10%
3.3. Power a. At turn on
< 6 Watts @ +25°C b. Slope
- -0.024 Watts/°C typical
To calculate the typical steady state power use the following formula.
Pss = (TT
- ambient temperature of unit)°C x 0.024 (Watts)
4. MECHANICAL 4.1. Heated cavity holds the following crystals and semi-conductors 4.2. Applicable series 4.3. Model number 4.4. Outline drawing
HC-35/U, T0-5, and T0-39 M05 series M05VVTT (Customer specified) 125-366
- In still air.
See ISOTEMP application note 146-003 for design considerations.
CHARLOTTESVILLE, VA USA .isotemp.
CODE ID 31785
MODEL NO. M05VVTT
PAGE OF...
