datasheet4u.com

900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Integrated Silicon Solution Electronic Components Datasheet

IS25WP064 Datasheet

1.8V SERIAL FLASH MEMORY

No Preview Available !

IS25WP064 pdf
IS25WP128
IS25WP064
IS25WP032
128/64/32M-BIT
1.8V SERIAL FLASH MEMORY WITH 133MHZ MULTI I/O SPI &
QUAD I/O QPI DTR INTERFACE
ADVANCED DATA SHEET


Integrated Silicon Solution Electronic Components Datasheet

IS25WP064 Datasheet

1.8V SERIAL FLASH MEMORY

No Preview Available !

IS25WP064 pdf
128/64/32M-BIT
1.8V SERIAL FLASH MEMORY WITH 133MHZ MULTI I/O SPI &
QUAD I/O QPI DTR INTERFACE
IS25WP128/064/032
ADVANCED INFORMATION
FEATURES
Industry Standard Serial Interface
- IS25WP128: 128M-bit/16M-byte
- IS25WP064: 64M-bit/8M-byte
- IS25WP032: 32M-bit/4M-byte
- 256 bytes per Programmable Page
- Supports standard SPI, Fast, Dual, Dual
I/O, Quad, Quad I/O, SPI DTR, Dual I/O
DTR, Quad I/O DTR, and QPI
- Supports Serial Flash Discoverable
Parameters (SFDP)
High Performance Serial Flash (SPI)
- 50MHz Normal and 133Mhz Fast Read
- 532 MHz equivalent QPI
- DTR (Dual Transfer Rate) up to 66MHz
- Selectable dummy cycles
- Configurable drive strength
- Supports SPI Modes 0 and 3
- More than 100,000 erase/program cycles
- More than 20-year data retention
Flexible & Efficient Memory Architecture
- Chip Erase with Uniform: Sector/Block
Erase (4K/32K/64K-Byte)
- Program 1 to 256 bytes per page
- Program/Erase Suspend & Resume
Efficient Read and Program modes
- Low Instruction Overhead Operations
- Continuous Read 8/16/32/64-Byte burst
- Selectable burst length
- QPI for reduced instruction overhead
- AutoBoot operation
Low Power with Wide Temp. Ranges
- Single 1.65V to 1.95V Voltage Supply
- 10 mA Active Read Current
- 8 µA Standby Current
- 1 µA Deep Power Down
- Temp Grades:
Extended: -40°C to +105°C
V Grade: -40°C to +125°C
Auto Grade: up to +125°C
Advanced Security Protection
- Software and Hardware Write Protection
- Power Supply lock protect
- 4x256-Byte dedicated security area
with user-lockable bits, (OTP) One
Time Programmable Memory
- 128 bit Unique ID for each device
Industry Standard Pin-out & Packages(1)
- JM =16-pin SOIC 300mil(2)
- JB = 8-pin SOIC 208mil
- JF = 8-pin VSOP 208mil
- JK = 8-contact WSON 6x5mm
- JL = 8-contact WSON 8x6mm
- JG= 24-ball TFBGA 6x8mm
- KGD (Call Factory)
Notes:
1. Call Factory for other package options available
2. For the additional RESET# pin option, call Factory
Integrated Silicon Solution, Inc.- www.issi.com
Rev. 00B
11/14/2014
2


Part Number IS25WP064
Description 1.8V SERIAL FLASH MEMORY
Maker ISSI
Total Page 30 Pages
PDF Download
IS25WP064 pdf
IS25WP064 Datasheet PDF
[partsNo] view html
View PDF for Mobile








Similar Datasheet

1 IS25WP064 1.8V SERIAL FLASH MEMORY ISSI
ISSI
IS25WP064 pdf





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy