CPC1718J Datasheet | IXYS

Features - 17.5ADC Load Current with 5°C/W Heat Sink - Low 0.075 On-Resistance - 100VP Blocking Voltage - 2500Vrms Input/Output Isolation - Low Thermal Impedance: JC = 0.3 °C/W - Isolated, Low Thermal Impedance Ceramic Pad for Heat Sink Applications - Low Drive Power Requirements - No EMI/RFI Generation Applications - Industrial Controls / Motor Control - Robotics - Medical Equipment- Patient/Equipment Isolation - Instrumentation - Multiplexers - Data Acquisition - Electronic Switching - I/O Subsystems - Meters (Watt-Hour, Water, Gas) - Transportation Equipment Approvals - UL 508 Recognized ponent: File E69938 Pin Configuration + - 34 - + 100V Single-Pole, Normally Open DC-Only Power Relay Description IXYS Integrated Circuits brings Opto MOS® technology, reliability and pact size to a new family of high-power Solid State Relays. As part of this family, the CPC1718J single-pole normally open (1-Form-A) DC Solid State Power Relay employs optically coupled MOSFET technology to provide 2500Vrms of input to output isolation. The optically coupled outputs, that use patented Opto MOS architecture, are controlled by a highly efficient infrared LED. The bination of low on-resistance and high load current handling capability makes this relay suitable for a variety of high performance DC switching applications. The unique ISOPLUS-264 package pioneered by IXYS enables Solid State Relays to achieve the highest load current and power ratings. This package features a unique IXYS process where the silicon chips are soft soldered onto the Direct Copper Bond (DCB) substrate instead of the traditional copper leadframe. The DCB ceramic, the same substrate used in high power modules, not only provides 2500Vrms isolation but also very low junction-to-case thermal impedance (0.3 °C/W). Ordering Information Part CPC1718J Description ISOPLUS-264 Package (25 per tube) Switching Characteristics...