900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Infineon Technologies Electronic Components Datasheet

09A22200 Datasheet

Analog AMR/GMR Angle Sensors

No Preview Available !

TLE5x09A16(D)
Analog AMR/GMR Angle Sensors
Features
• Single and dual die sensor with AMR or GMR technology
• Separate supply pins for top and bottom sensor
• Low current consumption and quick start up
• 180°(AMR) and 360°(GMR) contactless angle measurement
• Output amplitude optimized for circuits with 3.3 V or 5 V supply voltage
• Immune to airgap variations due to MR based sensing principle
• Automotive qualified Q100, Grade 1: -40°C to 125°C (ambient temperature)
• Pre-amplified output signals for differential or single-ended applications
• Diverse redundance combination of GMR sensor and AMR sensor in one package possible
• High accuracy typically 0.1° overall angle error for AMR sensor
• Green product (RoHS compliant)
Functional Safety
Safety Manual and Safety Analysis Summary Report available on request.
Product Validation
Developed for automotive applications. Product qualification according to AEC-Q100.
Potential Applications
The TLE5x0916(D) angle sensors are designed for angular position sensing in safety critical automotive and
non- automotive applications. Their high accuracy combined with short propagation delay make especially
the GMR sensor variants suitable for systems with high speeds and high accuracy demands such as brush-less
DC (BLDC) motors for actuators and electric power steering systems (EPS). The AMR sensor variants with their
typically accuracy of 0.1° fit for systems with high speeds and high accuracy demands such as pedals, levers
or brush-less DC (BLDC) motors with an even number of pole pairs. At the same time their fast start-up time
and low overall power consumption enables the device to be employed for low-power turn counting.
Extremely low power consumption can be achieved with power cycling, where the advantage of fast power on
time reduces the average power consumption. Potential applications are:
• BLDC motors
• Pedals and rotary switches
• Steering angle sensing
• Valve or flap position sensing
Data Sheet
www.infineon.com/sensors
1
V 2.0
2018-12


Infineon Technologies Electronic Components Datasheet

09A22200 Datasheet

Analog AMR/GMR Angle Sensors

No Preview Available !

TLE5x09A16(D)
Analog AMR/GMR Angle Sensor
Figure 1 A usual application for TLE5x09A16(D) is the electrically commutated motor
Description
The TLE5x0916(D) are angle sensor with analog outputs. They detect the orientation of a magnetic field by
measuring sine and cosine angle components with Magneto Resistive (MR) elements. The sensors provide
analog sine and cosine output voltages that describe the magnetic angle in a range of 0 to 180° (AMR sensor),
and 0 to 360° (GMR sensor), respectively. There are single die and dual die combinations with a Giant Magneto
Resistance (GMR) sensor for full 360° angle range or also an Anisotropic Magneto Resistance (AMR) sensor for
high precision in a top-bottom configuration in one package possible. The following derivatives of the
TLE5x09A16(D) sensor family are available:
• Single die GMR: TLE5009A16
• Dual die GMR: TLE5009A16D
• Single die AMR: TLE5109A16
• Dual die AMR: TLE5109A16D
• Dual die AMR (bottom) / GMR (top): TLE5309D
The differential MR bridge signals are independent of the magnetic field strength to maintain constant output
voltage over a wide temperature and field range. The analog output is designed for differential or single-ended
applications and an internal temperature compensation is applied for higher accuracy.
The sensor is available as single die version (TLE5x09A16) and dual die version (TLE5x09A16D) for safety
applications that require redundancy. The two versions are pin-compatible for easy scalability. In the dual die
TLE5x09A16D, both sensor dies are supplied independently by separate supply and ground pins.
Table 1 TLE5009A16(D) Derivate ordering codes
Product Type
Marking
Ordering Code Package
TLE5009A16 E1200 09A11200 SP001285624 PG-TDSO-16
TLE5009A16 E1210 09A11210 SP001296110 PG-TDSO-16
TLE5009A16 E2200 09A12200 SP001296118 PG-TDSO-16
TLE5009A16 E2210 09A12210 SP001296114 PG-TDSO-16
TLE5009A16D E1200 09A21200 SP001285628 PG-TDSO-16
TLE5009A16D E1210 09A21210 SP001296122 PG-TDSO-16
Description
3.3 V, single die, without TCO1)
3.3 V, single die, with TCO1)
5.0 V, single die, without TCO1)
5.0 V, single die, with TCO1)
3.3 V, dual die, without TCO1)
3.3 V, dual die, with TCO1)
Data Sheet
2
V 2.0
2018-12


Part Number 09A22200
Description Analog AMR/GMR Angle Sensors
Maker Infineon
Total Page 30 Pages
PDF Download

09A22200 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 09A22200 Analog AMR/GMR Angle Sensors
Infineon





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy