PVI5050NPbF
PVI5050NPbF is Photovoltaic Isolator manufactured by Infineon.
- Part of the PVI1050NPbF comparator family.
- Part of the PVI1050NPbF comparator family.
Description
The PVI Series Photovoltaic Isolator generates an electrically isolated DC voltage upon receipt of a DC input signal. It is capable of directly driving gates of power MOSFETs or IGBTs. It utilizes a monolithic integrated circuit photovoltaic generator of novel construction as its output. The output is controlled by radiation from a Ga Al As light emitting diode (LED), which is optically isolated from the photovoltaic generator.
The PVI Series is ideally suited for applications requiring high-current and/or high-voltage switching with optical isolation between the low-level driving circuitry and high-energy or high-voltage load circuits. It can be used for directly driving gates of power MOSFETs. The dual-channel device allows its outputs to drive independent discrete power MOSFETs, or be connected in parallel or in series to provide higher current drive for power MOSFETs or higher voltage drive for IGBTs. The PVI Series Photovoltaic isolators employ fast turn-off circuitry.
These PVI Series Photovoltaic Isolators are packaged in 8-pin, molded DIP packages and available with either thru-hole or surface-mount (“gull-wing”) leads, in plastic shipping tubes.
Applications
- Load Distribution
- Industrial Controls
- Current-to-Voltage Conversion
- Custom Solid-State Relay
PVI1050NPb F PVI1050NS/TPb F PVI5050NPb F PVI5050NSPb F
Photovoltaic Isolator Single and Dual Channel
5-10 Volt Output
Features
- Isolated Voltage Source
- Monolithic Construction
- Up to 5A Output
- Single or Dual Output
- Solid-State Reliability
Part Identification PVI1050NPb F PVI5050NPb F PVI1050NSPb F PVI5050NSPb F
PVI1050NS-TPb F thru-hole thru-hole
Surface-mount (gull-wing)
Surface-mount (gull-wing)
Surface-mount, tape and reel
2017-12-05
PVI1050NPb F/PVI1050NS/TPb F PVI5050NPb F/PVI5050NSPb F
Electrical Specifications (-40°C TA +85°C unless otherwise specified) INPUT CHARACTERISTICS Input Current Range (see figure 4) Maximum Forward Voltage Drop @ 10m A, 25°C (see figure 5)...
