Datasheet4U Logo Datasheet4U.com

TLE4942-1C Datasheet Differential Two-wire Hall Effect Sensor Ic

Manufacturer: Infineon

Overview: Data Sheet, V4.2, January 2018 Differential Two-Wire Hall Effect Sensor-IC for Wheel Speed Applications with Direction Detection TLE4942-1C in PG-SSO2-4 Sensors Never stop thinking. Edition 2010-02-25 Published by Infineon Technologies AG 81726 München, Germany © 2010 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (.infineon.). Warnings Due to technical requirements, ponents may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies ponents may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such ponents can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

Datasheet Details

Part number TLE4942-1C
Manufacturer Infineon
File Size 653.45 KB
Description Differential Two-Wire Hall Effect Sensor IC
Datasheet TLE4942-1C-Infineon.pdf

Key Features

  • Two-wire PWM current interface.
  • Detection of rotation direction.
  • Airgap diagnosis.
  • Assembly position diagnosis.
  • Dynamic self-calibration principle.
  • Single chip solution.
  • No external components needed.
  • High sensitivity.
  • South and north pole pre-induction possible.
  • High resistance to piezo effects.
  • Large operating air-gaps.
  • Wide operating temperature range.
  • TLE4942-1C: 1.8 nF overm.

TLE4942-1C Distributor