XDP710 Datasheet | Infineon

Features - patible with Infineon’s Opti MOSTM - patible with Infineon’s Linear FET - Wide input voltage range: 5.5 V to 80 V - Transient withstand: up to 100 V for 500 ms - Dedicated current and voltage ADCs: 12-bit - Programmable and pre-set FET active SOA protection - Integrated gate driver and charge pump for external N-Channel MOSFET - Configurable fast FET's shut down: two step turn-off or 1.5 A pull-down current - PMBus interface: 1 MHz - Precision input and output voltage monitoring and reporting: ≤1% - Precision FET's current monitoring and reporting: ≤ 1% - Precision input power monitoring and reporting: ≤ 2% - Energy monitoring and reporting - Programmable input and output OV and UV protections - Support for external temperature sensor and OT protection - Sequential turn-on capability - 29-lead (6 mm x 6 mm) VQFN package - -40°C to 125°C junction temperature Potential applications - Server and datacenter - 24 V - 48 V Industrial systems - Power distribution systems - Intelligent e-fuse - Network router and switches Description XDP710 is a wide input voltage Hot Swap and System monitoring Controller IC that drives a single or multiple parallel N-Channel MOSFETs. In addition to a controlled turn ON, XDP710 provides continuous system health monitoring and munication to the main MCU via PMBus interface. The high speed munication through PMBus allows system designers to disable the downstream sub-systems fully or partially. It incorporates an extensive variety of system protections for safety operation and generates various protection responses depending on the severity of the incident. Latch off, reset, system shutdown and retry are some examples of response types. Its SOA protection effectively ensures that the system FET always operates under safe condition. Datasheet .infineon. Please read the sections "Important notice" and "Warnings" at the end of this document Rev. 2.0 2022-11-22 XDP710 Hot-swap Controller Wide input voltage range (5.5 V to 80 V)...