Previous Version: 1.0 ( ICE3A1065L/ICE3A1565L ), 1.2 ( ICE3B0365L )
Subjects (major changes since last revision)
Group ICE3B0365L, ICE3A1065L and ICE3A1565L together
11, 12, 13
Revise typo to trigger level at FB ( C5 )
15 Revise pulse drain current
20 Add temperature derating curve
25 Add PCB layout recommendation
For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or
the Infineon Technologies Companies and Representatives worldwide: see our webpage at http://
CoolMOS™, CoolSET™ are trademarks of Infineon Technologies AG.
Published by Infineon Technologies AG,
© Infineon Technologies AG 1999.
All Rights Reserved.
The information herein is given to describe certain components and shall not be considered as warranted charac-
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
For further information on technology, delivery terms and conditions and prices please contact your nearest Infi-
neon Technologies Office in Germany or our Infineon Technologies Representatives worldwide (see address list).
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may