• Part: ICE3DS01LG
  • Description: Off-Line SMPS Current Mode Controller
  • Manufacturer: Infineon
  • Size: 632.06 KB
Download ICE3DS01LG Datasheet PDF
Infineon
ICE3DS01LG
ICE3DS01LG is Off-Line SMPS Current Mode Controller manufactured by Infineon.
- Part of the ICE3DS01L comparator family.
Datasheet, V2.0, 15 May 2003 PWM-FF IC ICE3DS01L ICE3DS01LG Off-Line SMPS Current Mode Controller with integrated 500V Startup Cell ..net Power Management & Supply N e v e r s t o p t h i n k i n g . ICE3DSO1L(G) Revision History: Previous Version: Page Subjects (major changes since last revision) 2003-05-15 Datasheet For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or the Infineon Technologies panies and Representatives worldwide: see our webpage at http:// .infineon. Cool MOS™, Cool SET™ are trademarks of Infineon Technologies AG. Edition 2003-05-15 Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81541 München © Infineon Technologies AG 1999. All Rights Reserved. Attention please! The information herein is given to describe certain ponents and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide (see address list). Warnings Due to technical requirements ponents may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies ponents may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such ponents can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be...