Current Version: 2.0 as of 18.05.01
Previous Version: 1.1, Dec. 2000
Subjects (major changes since last revision)
3-12 3-12 Sec. 3.4.8: max. datarate changed, Sec. 3.4.9: max. output current changed
4-4 4-4 value of a changed to 1.414
value for C2 changed to 22nF according to bill of materials, τ2 and T2 changed
5-3 5-3 min. supply current limits added, max. limits changed
5-4 5-4 supply current max. limit changed, min. limit added
5-5 5-5 3VOUT min. & max. limits changed, TAGC typ. & max. values changed
5-6 5-6 Section “SLICER” reworked, max. datarate at given load capacitance quoted,
high output voltage limits changed, precharge current: min., max. limits changed
5-7 5-7 PDO load and leakage currents limits and typ. values changed, FSK demodula-
tion gain min. limit changed
PDWN-current max. limit changed, supply currents min. limits added, max. limits
changed, 3VOUT min. & max. limits changed, ITAGC_out limits changed
5-10 5-10 Section “SLICER” reworked, max. datarate at given load capacitance quoted,
high output voltage limits changed, precharge current: min., max. limits changed,
PDO output voltage removed
C18 value changed
ABM®, AOP®, ARCOFI®, ARCOFI®-BA, ARCOFI®-SP, DigiTape®, EPIC®-1, EPIC®-S, ELIC®, FALC®54, FALC®56, FALC®-E1, FALC®-LH, IDEC®, IOM®,
IOM®-1, IOM®-2, IPAT®-2, ISAC®-P, ISAC®-S, ISAC®-S TE, ISAC®-P TE, ITAC®, IWE®, MUSAC®-A, OCTAT®-P, QUAT®-S, SICAT®, SICOFI®, SICOFI®-
2, SICOFI®-4, SICOFI®-4µC, SLICOFI® are registered trademarks of Infineon Technologies AG.
ACE™, ASM™, ASP™, POTSWIRE™, QuadFALC™, SCOUT™ are trademarks of Infineon Technologies AG.
Published by Infineon Technologies AG,
© Infineon Technologies AG May 2001.
All Rights Reserved.
As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for applications, processes and circuits im-
plemented within components or assemblies.
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved.
Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest
Infineon Technologies Office.
Infineon Technologies AG is an approved CECC manufacturer.
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing
material back, if it is sorted. You must bear the costs of transport.
For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose!
Critical components1 of the Infineon Technologies AG, may only be used in life-support devices or systems2 with the express written approval of the
Infineon Technologies AG.
1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-
support device or system, or to affect its safety or effectiveness of that device or system.
2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they
fail, it is reasonable to assume that the health of the user may be endangered.