ROK104022 Datasheet | Infineon

Description The Bluetooth MCM Solution ROK104001 from Infineon Technologies is a plete solution for fast implementation, and cuts your time-to-market. It is a short-range, pact and cost effective radiobaseband module that supports both voice and data transmission and can be implemented in any electronic device. The module includes a baseband processor with 4 Mbit Flash memory, a radio solution, antenna interfaces and application supporting circuitry. The ROK 104 001 es with either the Embedded munication Platform (ECP) firmware, providing the full Bluetooth software stack, including profiles for serial munication, or with the basic Bluetooth firmware for signaling at the HCI (Host Controller Interface) level. OD UCT I EF Since this solution is also FCC and ETSI type approved on delivery, cost and time for qualification and type approval is greatly minimized. s Bluetooth -Firmware in two versions: -a) Serial munication (GAP/SPP/DUN/LAN) -b) HCI : Standard Bluetooth Interface Point- to -Multipoint, 7 slaves with the HCI firmware or 3 slaves with embedded stack Power management: PARK, SNIFF & HOLD as well as system power saving Pre-qualified for Bluetooth spec. 1.1 FCC & ETSI type approved Multiple interfaces UART, PCM, Bidirectional serial interface/GPIO, GPIO Voltage regulator included on module highly reduces the input voltage requirements s s s s Key Features s s s A small and cost effective Bluetooth system Output power class 2 plete Bluetooth function including: - Hardware: Radio, Baseband, Crystal & Memory, Voltage regulator and RC filters s Note: The Bluetooth trademarks are owned by Bluetoth SIG, Inc. and used by Infineon Technologies under license. .infineon./bluetooth ROK 104 001 Multi Chip Module N e v e r s t o p t h i n k i n g . Configuration ECP - Firmware OD UCT I EF ROK 104 001 Serial munication 8-bit GPIO Bluetooth Core TM ARM7TDMI Networking Host Application ECI Driver Debug Interface Base Band Chip Host Host...