IP5310 Datasheet | Injoinic

Features - Switch buck charger and boost - 3A Synchronous switching charger and 5V 3.1A boost converter - Boost converter efficiency up to 93% - Switching charger efficiency up to 92% - Integrated power-path management, charging batteries and charging cellphones at the same time - Charger - Adaptive charging current control, excellent adapter patibility - Support TYPE-C port with 3A current, and MICRO-B port with 2A current - Support BC1.2 protocol, patible with PC USB charge - Support 4.20V/4.35V/4.40V battery - Support battery thermal protection (with NTC resistor) - State of charge (SOC) indicator - Integrated LED controller supports 4/3/2/1 LEDs as the SOC indicator - Configurable charging/discharging curve makes the SOC indicate LEDs more even - Fully featured - Integrated cellphone plug-in and plug-out detector - Integrated TYPE_C DRP protocol, Support for charging and discharging in the one TYPE-C port - support current load pensation - Integrated two DCP modules for detect cellphone charging current - Low power - Smart load detector, switching to standby mode automatically - Ultra simplified BOM - Integrated power FET, charging/boosting with a single inductor - 500k Hz switching frequency, supports 1u H inductor - Multiple protections, high reliability - Output over-current, over-voltage, short-circuit protection - Input over-voltage, over-current, battery over-charge, over-drain, over-current protection - Thermal regulation and thermal shutdown, battery NTC protection - ESD 4KV, maximum 11V transit over-voltage sustainable - Fully customizable - I2C interface makes customization flexible and low-cost 2. Applications - Power bank, Portable Charger - Mobile Phones, Smart Phones, Handheld Devices, Portable Media Player, Tablet 3. Description IP5310 is a fully-integrated multi-function power management So C. It integrates a boost converter, a Li battery charger management system, a battery state of charge indicate controller, and built-in TYPE-C protocol. It...