GLCD5110 Graphic LCD modulel1
Graphic LCD 84x48 pixel
l Graphic LCD module # LPH7366. Resolution is 84 x 48 pixel.
l Built-in PCD8544 controller with SPI interface bus.
l Built-in the backlight blue LED controlled by software
l Supply voltage range is +3 to +3.3V. Maximum current is 10mA (with backlight
l Display the standard size 5x7 pixel character up to 14 characters 6 lines and
mono-tone graphic image.
l Size is 4.5 x 4.5 cm.
l Easy to connection
l Interface with any popular microcontroller.
- If interface with +3V logic system, user can connect GLCD with
microcontroller port directly.
- If interface with +5V system, user must connect through the attenuator
circuit for redeuce the logic level from +5V to +3 or +3.3V or not over the supply voltage of
The figure 1 shows size and pin assignment of GLCD5110.
The figure 2 shows the interfacing circuit with the microcontroller and figure 3 shows
the simple attenuator circuit for interfacing GLCD5110 with +5V microcontroller system.