ICS348 - Quad PLL Field Programmable VersaClock Synthesizer
Integrated Circuit Systems
General Description
The ICS348 field programmable clock synthesizer generates up to 9 high-quality, high-frequency clock outputs including multiple reference clocks from a low frequency crystal or clock input.
Key Features
include eight selectable configuration registers, up to two sets of four low-skew outputs. Using Phase-Locked Loop (PLL) techniques, the device runs from a standard fundamental mode, inexpensive crystal, or clock. It can replace multiple crystals and oscillators, saving board space and cost. The ICS348 is also available in factory programmed custom versions for high-volume.
Full PDF Text Transcription for ICS348 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
ICS348. For precise diagrams, and layout, please refer to the original PDF.
ICS348 www.DataSheet4U.com Quad PLL Field Programmable VersaClock Synthesizer Description The ICS348 field programmable clock synthesizer generates up to 9 high-quality, ...
View more extracted text
field programmable clock synthesizer generates up to 9 high-quality, high-frequency clock outputs including multiple reference clocks from a low frequency crystal or clock input. The ICS348 has 4 independent on-chip PLLs and is designed to replace crystals and crystal oscillators in most electronic systems. Using ICS’ VersaClock software to configure PLLs and outputs, the ICS348 contains a One-Time Programmable (OTP) ROM to allow field programmability. Programming features include eight selectable configuration registers, up to two sets of four low-skew outputs. Using Phase-Locked Loop (PLL) techniques, the device runs fr
ICS348 Datasheet
