Datasheet4U Logo Datasheet4U.com

82562ET - 10/100 Mbps Platform LAN Connect (PLC)

General Description

Sept.

1999 Nov.

Initial release.

Corrected Figure 4 “NRZ to MLT-3 Encoding Diagram on Pg.

11 to reflect correct signal transitions.

Removed “10BASE-T Error Detection and Reporting” section since the 82562 does not do 10BASE-T

Key Features

  • IEEE 802.3 10BASE-T/100BASE-TX compliant physical layer interface.
  • IEEE 802.3u Auto-Negotiation support.
  • Digital Adaptive Equalization control.
  • Link status interrupt capability.
  • XOR tree mode support.
  • 3-port LED support (speed, link and activity).
  • 10BASE-T auto-polarity correction.
  • LAN Connect Interface.
  • Diagnostic loopback mode.
  • 1:1 transmit transformer ratio support.
  • Low power (less than 300 mW in active transmit mode).
  • Reduced pow.

📥 Download Datasheet

Datasheet Details

Part number 82562ET
Manufacturer Intel Corporation
File Size 452.90 KB
Description 10/100 Mbps Platform LAN Connect (PLC)
Datasheet download datasheet 82562ET Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
8250-6005 (8250 Series) D Sub Plug Connector 3M Interconnect Solutions
8250-xxxx (8250 Series) D Sub Plug Connector 3M Interconnect Solutions
8250ACZUMHB KMPC8250ACZUMHB Motorola Semiconductor
8251 Programmable Communication Interface AMD
8251A PROGRAMMABLE COMMUNICATION INTERFACE Rochester Electronics

Other Datasheets by Intel Corporation

Part Number Description
82562EP 10/100 Mbps Platform LAN Connect
8256AH MULTIFUNTION MICROPROCESSOR SUPPORT CONTROLLER
82503 DUAL SERIAL TRANSCEIVER (DST)
8251A PROGRAMMABLE COMMUNICATION INTERFACE
82527 SERIAL COMMUNICATIONS CONTROLLER CONTROLLER AREA NETWORK PROTOCOL

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
82562ET 10/100 Mbps Platform LAN Connect (PLC) Networking Silicon Datasheet Product Features ■ IEEE 802.3 10BASE-T/100BASE-TX compliant physical layer interface ■ IEEE 802.3u Auto-Negotiation support ■ Digital Adaptive Equalization control ■ Link status interrupt capability ■ XOR tree mode support ■ 3-port LED support (speed, link and activity) ■ 10BASE-T auto-polarity correction ■ LAN Connect Interface ■ Diagnostic loopback mode ■ 1:1 transmit transformer ratio support ■ Low power (less than 300 mW in active transmit mode) ■ Reduced power in “unplugged mode” (less than 50 mW) ■ Automatic detection of “unplugged mode” ■ 3.3 V device ■ 48-pin Shrink Small Outline Package Revision 1.4 November 2006 Revision History Revision 0.55 0.6 1.0 1.1 1.2 1.3 1.4 Revision Date Description Sept.