112CNQ030APbF, 112CNQ030ASMPbF
Bulletin PD-21004 01/05
Voltage Ratings
Part number
VR Max. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V)
112CNQ030A..
30
Absolute Maximum Ratings
Parameters
112CNQ Units
Conditions
IF(AV) Max. Average Forward
Current * See Fig. 5
Per Leg
Per Device
IFSM Max. Peak One Cycle Non-Repetitive
Surge Current (Per Leg) * See Fig. 7
EAS Non-RepetitiveAvalancheEnergy
(Per Leg)
55
110
5100
880
36
A 50% duty cycle @ TC = 131 °C, rectangular wave form
A
5µs Sine or 3µs Rect. pulse
Following any rated
load condition and with
10ms Sine or 6ms Rect. pulse rated VRRM applied
mJ TJ = 25 °C, IAS = 8 Amps, L = 1.12 mH
IAR RepetitiveAvalancheCurrent
(Per Leg)
8 A Current decaying linearly to zero in 1 µsec
Frequency limited by TJ max. VA = 1.5 x VR typical
Electrical Specifications
Parameters
112CNQ Units
Conditions
VFM Max. Forward Voltage Drop
(Per Leg) * See Fig. 1
(1)
IRM Max. Reverse Leakage Current
(Per Leg) * See Fig. 2 (1)
CT Max. Junction Capacitance (Per Leg)
LS Typical Series Inductance (Per Leg)
dv/dt Max. Voltage Rate of Change
(Rated VR)
0.49
0.57
0.39
0.51
3.5
400
5100
5.5
10000
V
V
V
V
mA
mA
pF
nH
V/ µs
@ 55A
@ 110A
TJ = 25 °C
@ 55A
@ 110A
TJ = 125 °C
TJ = 25 °C
TJ = 125 °C
VR = rated VR
VR = 5VDC, (test signal range 100Khz to 1Mhz) 25°C
Measured lead to lead 5mm from package body
(1) Pulse Width < 300µs, Duty Cycle <2%
Thermal-Mechanical Specifications
Parameters
112CNQ Units
Conditions
TJ Max. Junction Temperature Range
Tstg Max. Storage Temperature Range
RthJC
Max. Thermal Resistance Junction
to Case (Per Leg)
RthJC Max. Thermal Resistance Junction
to Case (Per Package)
RthCS Typical Thermal Resistance, Case
to Heatsink (D61-8 Only)
wt Approximate Weight
T MountingTorque
Min.
(D61-8 Only)
Max.
-55 to 150
-55 to 150
0.50
°C
°C
°C/W DCoperation
* See Fig. 4
0.25 °C/W DCoperation
0.30
7.8 (0.28)
40 (35)
58 (50)
°C/W Mounting surface , smooth and greased
Device flatness < 5 mils
g (oz.)
Kg-cm
(Ibf-in)
2 www.irf.com
