6CWQ04FNPbF
Bulletin PD-21057 rev. B 07/06
Voltage Ratings
Part number
VR Max. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V)
6CWQ04FNPbF
40
Absolute Maximum Ratings
Parameters
6CWQ... Units
Conditions
IF(AV) Max. Average Forward (Per Leg)
Current * See Fig. 5 (Per Device)
IFSM Max.PeakOneCycleNon-Repetitive
Surge Current (Per Leg) * See Fig. 7
EAS Non-Repet. Avalan. Energy (PerLeg)
IAR Repetitive Avalanche Current
(Per Leg)
3.5
7
500
80
8.0
1.0
A 50% duty cycle @ TC = 135°C, rectangular wave form
5μs Sine or 3μs Rect. pulse Following any rated
A load condition and with
10ms Sine or 6ms Rect. pulse rated VRRM applied
mJ TJ = 25 °C, IAS = 1 Amp, L = 16 mH
A Current decaying linearly to zero in 1 μsec
Frequency limited by TJ max. VA = 1.5 x VR typical
Electrical Specifications
Parameters
6CWQ... Units
Conditions
VFM Max. Forward Voltage Drop
(Per Leg) * See Fig. 1
(1)
IRM Max. Reverse Leakage Current
(Per Leg) * See Fig. 2 (1)
VF(TO) Threshold Voltage
rt Forward Slope Resistance
CT Typ. Junction Capacitance (Per Leg)
LS Typical Series Inductance (Per Leg)
dv/dt Max. Voltage Rate of Change
0.53
0.67
0.49
0.62
2
24
0.34
37.33
189
5.0
10000
V @ 3A
V @ 6A
V @ 3A
V @ 6A
TJ = 25 °C
TJ = 125 °C
mA TJ = 25 °C
mA TJ = 125 °C
V TJ = TJ max.
mΩ
VR = rated VR
pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C
nH Measured lead to lead 5mm from package body
V/μs (Rated VR)
(1) Pulse Width < 300μs, Duty Cycle <2%
Thermal-Mechanical Specifications
Parameters
6CWQ... Units
Conditions
TJ
Tstg
RthJC
Max. Junction Temperature Range (*)
Max. Storage Temperature Range
Max. Thermal Resistance (Per Leg)
Junction to Case
(Per Device)
-40 to 150
-40 to 150
4.70
2.35
°C
°C
°C/W DC operation
wt Approximate Weight
0.3 (0.01) g (oz.)
* See Fig. 4
Case Style
Marking Device
D-Pak
6CWQ04FN
Similar to TO-252AA
(*) dPtot
1
dTj < Rth( j-a) thermal runaway condition for a diode on its own heatsink
2 www.irf.com
